Hood, pattern №1300
Hood with sleeves, with a zipper in the center of the front. Suitable for women, men and children.
Suits for beginners
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
Head 48-50 cm
-
Head 51-53 cm
-
Head 54-56 cm
-
Head 57-59 cm
-
Head 60-62 cm
-
-
Height:
- Head 48-50 cm
- Head 51-53 cm
- Head 54-56 cm
- Head 57-59 cm
- Head 60-62 cm
$1
$6.50
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
Lined hood with a bib. The hood is of moderate volume, with a grown-on stand and a center panel. The front edge of the hood features a casing for an adjustable fit, with the elastic cord exiting to the right side through eyelets. The length of the bib extends below the waistline. The garment features a center front zipper closure that extends through the front edge of the hood.
-
Size Indication on the diagram 48-50 51-53 54-56 57-59 60-62 Hood height A 29,5 31,5 33,5 34,5 35,5 1/2 hood width B 27,0 28,5 30,0 31,0 32,0 Finished center back lengthе C 48,5 53,0 57,7 57,8 62,8 Finished center front seam length D 41,0 46,0 51,0 51,0 56,0 Finished shoulder width E 7,0 8,0 9,0 9,5 10,0
-
Main fabric. We recommend using faux fur with a medium pile length for this model, with a woven or knitted backing.
Lining fabric 1. For the lining, use dense, medium-weight materials that match the drape and weight of the main fabric. These may be made of natural, synthetic, or blended fibers. Lining, suiting, lightweight coating, and other suitable fabrics may be used.
Lining fabric 2. For the hood casing, use smooth, slippery lining fabrics made of synthetic or blended fibers.
-
The amount of fabric in meters.
Size 48-50 51-53 54-56 57-59 60-62 Main fabric, wide 140 cm 0,65 0,75 0,85 0,85 0,90 Lining fabric No.1, wide 140 cm 0,65 0,70 0,75 0,75 0,80 Lining fabric No.2, wide 140 cm(for casing at the hood) 0,15 0,15 0,20 0,25 0,25 A hat cord, width 3 mm 0,70 0,70 0,75 0,80 0,80 Detachable zipper Type 5, length 50,0 55,0 60,0 60,0 65,0
Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories:
1. Grommet 6-8 mm in diameter - 4 pcs.
2. Double-hole cord lock (stopper) - 2 pcs.
-
- Multipurpose sewing machine;
- An iron with or without steam;
- Regular presser foot;
- Hinged cording foot;
- Wooden iron;
- Ironing desk or console table;
- Hand needle for basting;
- Machine needles #80-85 for the main fabric;
- Machine needles #70-80 for the lining;
- Paper scissors;
- Scissors for textile cutting;
- Snaps pressing machine to install accessories grommets, depending on the diameter.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.
