Jacket, pattern №1360
Lined jacket with a dropped shoulder, cut-on stand collar, and snap closure. Front patch pockets with flaps. Drawstring casings with cords at the hem and the top edge of the collar stand.
Difficulty: 2/5
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
size 38-40, height 152-158
-
size 38-40, height 158-164
-
size 38-40, height 164-170
-
size 38-40, height 170-176
-
size 38-40, height 176-182
-
size 42-44, height 152-158
-
size 42-44, height 158-164
-
size 42-44, height 164-170
-
size 42-44, height 170-176
-
size 42-44, height 176-182
-
size 46-48, height 152-158
-
size 46-48, height 158-164
-
size 46-48, height 164-170
-
size 46-48, height 170-176
-
size 46-48, height 176-182
-
size 50-52, height 152-158
-
size 50-52, height 158-164
-
size 50-52, height 164-170
-
size 50-52, height 170-176
-
size 50-52, height 176-182
-
size 54-56, height 152-158
-
size 54-56, height 158-164
-
size 54-56, height 164-170
-
size 54-56, height 170-176
-
size 54-56, height 176-182
-
size 58-60, height 152-158
-
size 58-60, height 158-164
-
size 58-60, height 164-170
-
size 58-60, height 170-176
-
size 58-60, height 176-182
-
-
Size:
- 38-40
- 42-44
- 46-48
- 50-52
- 54-56
- 58-60
Height:
- 152-158
- 158-164
- 164-170
- 170-176
- 176-182
$8.80
$11
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
A loose fitting jacket, straight silhouette, length above the hip line, lined. The center front closure has separate plackets with 6 snap fasteners. The front has a one piece stand, an attached yoke, and patch pockets with flaps. The flaps are positioned along the yoke line. The back has a one piece stand, an attached yoke, and a center seam. On the front and back, casings are designed along the hemline and the upper edge of the one piece stand, allowing the fit to be adjusted with a drawstring and cord locks. The drawstring is brought to the right side of the garment through eyelets located near the center front. The shoulder line is lowered by 13.0-16.0 cm (depending on the garment size). The armhole is deepened. The armhole level is slightly above the waistline. The sleeve is set in, full length. The lower edge of the sleeve is finished with an attached cuff, with elastic tape inserted inside the cuff.
Model is wearing a size 42-44, height 170-176. Model parameters: Bust-line: 84 cm, Waist-line: 65 cm, Hips: 94,5 cm, Height: 173 cm.
-
Bust-line: 47,0 сm
Hips-line: 38,0 сm
Shoulders:
30,0 сm (for all sizes of height 152-158)
30,5 сm (for all sizes of height 158-164)
31,0 сm (for all sizes of height 164-170)
31,5 сm (for all sizes of height 170-176)
32,0 сm (for all sizes of height 176-182)
-
Size 38-40 42-44 46-48 50-52 54-56 58-60 Finished back length along the center back 63,4-69,8 63,8-70,2 64,2-70,6 64,6-71,0 65,0-71,4 65,4-71,8 Finished sleeve length (including cuff) 49,7-57,3 49,3-56,9 48,9-56,5 48,5-56,1 48,1-55,7 47,4-55,0
-
Main fabric. For this model, we recommend using medium-weight rainwear and jacket fabrics; rainwear and jacket fabrics with or without a waterproof coating; rainwear and jacket fabrics with or without various types of impregnation; rainwear fabrics with a membrane coating. In terms of composition, these can be materials made of natural, synthetic or blended fibers.
Lining fabric. For the lining of membrane fabrics, we recommend using a lining made of synthetic fibers; for rainwear, jacket and other fabrics, use a lining made of synthetic, blended or natural fibers.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material.
For example, you may use 33-34 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.
-
The amount of fabric in meters.
Size 38-40 42-44 46-48 50-52 54-56 58-60 Main fabric, wide 140 cm 1,65-1,80 1,75-1,90 1,80-1,95 1,85-2,05 1,95-2,15 2,00-
2,20Lining fabric, wide 140 cm 1,15-1,30 1,15-1,30 1,15-1,30 1,20-1,50 1,35-1,75 1,60-1,80 Interfacing (density 33-34 g/m2; width 150 cm) 0,70-0,75 0,70-0,75 0,70-0,80 0,75-0,80 0,75-0,80 0,75-0,80 Fusible on grain tape 0,55 0,55 0,60 0,60 0,60 0,65 Elastic band, 3.0 cm wide(for cuff) 0,45 0,45 0,45 0,50 0,50 0,50 A hat cord with diameter of 3 mm (for the neckline casing) 0,65 0,65 0,70 0,70 0,70 0,75 A hat cord with diameter of 3 mm (for the hem casing) 1,40 1,45 1,55 1,65 1,70 1,75
Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories:
01. Snap button with the diameter of 12.5-15.0 mm - 6 pcs.
02. Grommet with the diameter of 6 mm - 4 pcs.
03. Double-hole cord lock (stopper) - 4 pcs.
-
01. Multipurpose sewing machine;
02. An iron with or without steam;
03. Regular presser foot;
04. Hinged cording foot;
05. Wooden iron;
06. Ironing desk or console table;
07. Hand needle for basting;
08. Machine needles Microtex (extra sharp) №75-85 for the main fabric;
09. Machine needles №70 for the lining;
10. Paper scissors;
11. Scissors for textile cutting;
12. Snaps pressing machine to install accessories grommets and press studs, depending on the diameter.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.
