Jacket, pattern №1375
Loose-fitting insulated jacket with lining, dropped shoulders, and gathered hems on the body and sleeves. The design features a shawl collar and welt pockets with flaps.
Difficulty: 5/5
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
size 38, height 152-158
-
size 38, height 158-164
-
size 38, height 164-170
-
size 40, height 152-158
-
size 40, height 158-164
-
size 40, height 164-170
-
size 40, height 170-176
-
size 40, height 176-182
-
size 42, height 152-158
-
size 42, height 158-164
-
size 42, height 164-170
-
size 42, height 170-176
-
size 42, height 176-182
-
size 44, height 152-158
-
size 44, height 158-164
-
size 44, height 164-170
-
size 44, height 170-176
-
size 44, height 176-182
-
size 46, height 152-158
-
size 46, height 158-164
-
size 46, height 164-170
-
size 46, height 170-176
-
size 46, height 176-182
-
size 48, height 152-158
-
size 48, height 158-164
-
size 48, height 164-170
-
size 48, height 170-176
-
size 48, height 176-182
-
size 50, height 152-158
-
size 50, height 158-164
-
size 50, height 164-170
-
size 50, height 170-176
-
size 50, height 176-182
-
size 52, height 152-158
-
size 52, height 158-164
-
size 52, height 164-170
-
size 52, height 170-176
-
size 52, height 176-182
-
size 54, height 152-158
-
size 54, height 158-164
-
size 54, height 164-170
-
size 54, height 170-176
-
size 54, height 176-182
-
size 56, height 152-158
-
size 56, height 158-164
-
size 56, height 164-170
-
size 56, height 170-176
-
size 56, height 176-182
-
-
Size:
- 38
- 40
- 42
- 44
- 46
- 48
- 50
- 52
- 54
- 56
Height:
- 152-158
- 158-164
- 164-170
- 170-176
- 176-182
$8.80
$11
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
A loose-fitting jacket with a flared silhouette, insulated and lined. The garment length is below the hip line. The closure is an offset front buttoning with three rows of concealed snap fasteners. The front features pockets. The pockets are welt pockets with a welt, stitched ends, and a flap. The flap fastens with a snap fastener. The back has a sew-on yoke and a center seam. The hem of the front and back is gathered. The shoulder line is dropped 13.8–15.6 cm (depending on the garment size). The sleeves are set-in, with upper and lower seams, full length. The sleeve hem is gathered. Shawl collar.
Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 84 cm, Waist-line: 65 cm, Hips: 93 cm, Height: 172 cm. -
CONSTRUCTIVE EASE (EC)*:
Bust-line: 43,5 cm.
Shoulders:
24,5 cm (for all sizes of height 152-158);
25,0 cm (for all sizes of height 158-164);
25,5 cm (for all sizes of height 164-170);
26,0 cm (for all sizes of height 170-176);
26,5 cm (for all sizes of height 176-182).
Constructive ease consists of ease of package and ease of freedom.
Constructive ease is for a garment’s outer volume, ease of freedom is for a garment’s inner volume.
EF = EC – EP
We used 200 g/m2 density insulation material for our garment.
Ease of package was 5.0 cm (Ep). May differ according to a material type.
EASE OF FREEDOM (EF)*:
Bust-line: 38,5 cm.
Shoulders:
19,5 cm (for all sizes of height 152-158);
20,0 cm (for all sizes of height 158-164);
20,5 cm (for all sizes of height 164-170);
21,0 cm (for all sizes of height 170-176);
21,5 cm (for all sizes of height 176-182).
Hips-line: 10,0 cm.
ATTENTION! THE ALLOWANCE IS GIVEN FOR THE FINISHED GARMENT AND DOES NOT INCLUDE THE ADDITIONAL WIDTH FOR GATHERING AT THE BOTTOM OF THE GARMENT ON THE PATTERNS. -
Size 38 40 42 44 46 48 50 52 54 56 Finished back length along the center back, cm 60,8-64,0 61,0-67,4 61,2-67,6 61,4-67,8 61,6-68,0 61,8-68,2 62,0-68,4 62,2-68,6 62,4-68,8 62,6-69,0 Finished sleeve length, cm 49,5-53,0 49,6-56,6 49,7-56,7 49,8-56,8 49,9-56,9 50,0-57,0 50,1-57,1 50,1-57,1 50,2-57,2 50,2-57,2 -
Main fabric. We recommend using medium-weight and lightweight coating and jacket fabrics for this model; coating fabrics with a membrane coating; coating and jacket fabrics with a water-repellent finish.
For the facing piece, we recommend using faux fur with no stretch or with slight stretch.
Lining fabric. As a lining for membrane fabrics, we recommend using a lining made of synthetic fibers; for coating, jacket, and other fabrics, use a lining made of synthetic, blended, and natural fibers.
Insulation. For insulating the garment, we recommend using new-generation synthetic insulations with a protective layer on both sides – for example, Isosoft 34 with a density of 200 g/m2.
Interfacing material. For better sewing quality, we recommend using fusible interfacings. To interface the pieces, you need fusible interfacing with a density of 33–34 g/m2 and a width of 150 cm.
In cases where high temperature, glue, or a press cannot be used (membrane or waterproof materials), join two layers of fusible interfacing with the adhesive side inward for non-fusible interfacing.
Choose the interfacing density and interfacing methods according to the density and properties of the main fabric.
We used coated cotton fabric and ISOSOFT 34 insulation with a weight of 200 g/m² to make the garment. -
The amount of fabric in meters.
Size 38 40 42 44 46 48 50 52 54 56 Main fabric, wide 140 cm 1,65 1,65-1,80 1,70-1,85 1,75-1,90 1,80-1,95 1,85-2,00 1,90-2,00 1,95-2,10 1,95-2,10 2,00-2,15 Faux fur, 140 cm wide 0,75 0,75-0,80 0,75-0,80 0,75-0,80 0,75-0,80 0,75-0,80 0,80-0,85 0,80-0,85 0,80-0,85 0,80-0,85 Lining fabric, wide 140 cm 1,25-1,30 1,25-1,35 1,25-1,40 1,25-1,40 1,35-1,45 1,40-1,45 1,40-1,55 1,40-1,55 1,45-1,55 1,45-1,70 Insulation material (200 g/m2; width 140 cm) 1,60-1,70 1,65-1,80 1,65-1,80 1,70-1,80 1,70-1,80 1,75-1,90 1,80-1,90 1,85-2,05 1,90-2,10 1,95-2,10 Interfacing (density 33-34 g/m2; width 150 cm) - for fusible interfacing method 0,35
Interfacing (density 33-34 g/m2; width 150 cm) - for non-fusible interfacing method 0,70
Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.Accessories:
01. Snap button with the diameter of 12.5-15 mm - 8 pcs.
02. Metal chain hanger – 1 pc.
-
01. Multipurpose sewing machine;
02. An iron with or without steam;
03. Regular presser foot;
04. Hinged cording foot;
05. Wooden iron;
06. Ironing desk or console table;
07. Hand needle for basting;
08. Machine needles Microtex (extra sharp) #80-90 for the main fabric;
09. Machine needles #70-80 for the lining;
10. Paper scissors;
11. Scissors for textile cutting;
12. Snaps pressing machine to install accessories press studs, depending on the diameter.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.
