Dress in four versions, pattern №911

Use the Test Square to adjust the print scale! A test square for checking the A4/Letter scale is located on the first sheet of the A4/Letter pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Dress pattern in four versions:

Option 1. Dress with turtleneck. The dress is fitted, hits above the knee. The back is cut along the waistline. There is a centre seam in the back upper part. The sleeve is set-in, with one seam. Stand collar.

Option 2. Sleeveless dress. The sleeveless dress has a fitted silhouette, hits above the knee. The back is cut along the waistline. There is a centre seam in the back upper part. The armhole and the necklines are finished with a facing.

Option 3. Sleeveless dress with a stand collar.  The dress is fitted, hits above the knee, sleeveless. The back is cut along the waistline. There is a centre seam in the back upper part. Stand collar. The armhole is finished with bias tape.

Option 4. Dress with cut neckline and long sleeves. The dress is fitted, hits above the knee. The back is cut along the waistline. There is a centre seam in the back upper part. The sleeve is set-in, with one seam. The neckline is finished with bias tape.

Eases added to a pattern, cm:  Bust-line: (-1) см, Waist: 8,0 cm; Hips-line: 3 cm;  Hips-line: (-1)  cm; Shoulders: 1,5 см.

Fabric suggestion: for this garment we recommend soft, flowing mid-weight knitted fabrics with stretch factor 0.80-0.85. The composition of the fibre may be natural (wool, cotton, silk), artificial (viscose, modal), synthetic or blended. Please, pay attention, the garment is fitted, wearing ease is negative in some areas. Using a knit fabric with sufficient elasticity is highly recommended. If your fabric’s stretch factor is less than recommended, please, select the pattern which is 1-2 sizes larger than your regular size.

Amount of main fabric, wide 140 cm: 38 size: 1,35-1,40 м; 40-46 size: 1,35-1,50 м; 48 size: 1,70-1,75 м; 50,52 size: 1,75-1,95 м; 52 size: 1,25-1,40 м; 54 size: 1,75-2,00 м; 56 size: 1,75-2,05 м.

Amount of main fabric, wide 180 cm: 38 size: 1,35-1,40 м; 40-50 size: 1,35-1,50 м; 52.54 size: 1,40-1,50 м; 56 size: 1,40-1,55 м.

Amount of finishing fabric, wide 140 cm: 38-44 size: 0,45 м; 46-52 size: 0,45-0,50 м; 54,56 size: 0,50 м.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Pattern is given with seam allowances.

Degree of difficulty - "Beginners”

The photos shows a dresses sewed at the GRASSER  for pattern №911

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• 4 thread overlock machine;
• An iron with or without steam;
• Regular presser foot;
• Wooden iron;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles Stretch №70-80;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.