Dress, pattern №315

To set up printing of pattern N315 on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Dress pattern. Slim fit dress, volumetric in the upper part and narrower downwards. Cutting to the waistline with stitched belt. There are pintucks on the waistline of the front. The lower part of front with darts and middle seam, there is a cut in the seam, the height of which can be correct as desired. Single cut sleeve with low armhole length just above the elbow, with a single cut lapel cuff. The back with the average seam and pintucks to the waistline. On the front there is a boat neckline, on the back there is a deep V-neck. The zipper in the average seam of the back.

The length of ready-made dress by the average seam of the back from waist to bottom in size 44 at height 164-170 is 70 cm. 

Fabric suggestion: tight dress and costume fabric without stretching, keep in shape and lends itself well to wet-heat treatment (for example, tweed "Chanel"); Lining fabrics from natural fibers

Fabric consumption:  width is 140- 150 cm, the top length of fabric is 1.8 m. – 2.2 m; 0,4 m- finishing; 1,4 m - 1,6 m- lining.  

Pattern is given with seam allowances.

Level of difficulty - “For advanced beginner”

Sewing instruction is attached to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order wiil be in two print version:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter.  The patterns of top are located on a sheet measuring 60 * 256 cm.  The patterns of linings are located on a sheet measuring 60 * 188 cm.

Presented is a photo of dress from Chanel Haute Couture SS 2016 collection for visual demonstration of pattern №315

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.