Dress, Pattern №320

To set up printing of pattern on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Dress pattern. Fitted silhouette dress with short set-in sleeve. Patch pocket at the top of the forehand. In the upper part of the middle seam of the back is a cut, the clasp on the loop and button or hook. The neck and bottom sleeves processed through edge-taping. The average length of the back seam in finished product in 44 size is 85,5 cm at growth 164-170 cm (neck recessed to 11 mm).

Fabric suggestion: Plastic, soft dress and suit fabric without stretching or with small stretching; thick soft jersey.

Fabric consumption: width is 140-150cm, the length is 1.5 m. – 1.7 m. Fabric consumption is given in case of sewing or cutting mistake. Pattern pieces should be placed on the fold of a piece of fabric, but with allowance - 10 mm. (If you want it can be processed with the side seam.)

Pattern is given with seam allowances.

Degree of difficulty - “Beginner”

Sewing instruction is attached to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns are located on a sheet measuring 60*184 см.

Photo of a dress from the Proenza Schouler collection for visual demonstration of model pattern No. 320 from the GRASSER design bureau.

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.