Dress, Pattern №354

To set up printing of pattern N423 on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Dress pattern. Сlose-fitting silhouette dress, cutting through the waist, knee-length. The back middle seam. On the front of the skirt and behind are vertical reliefs. Waist decorated by faced belt. Dress has a set-in sleeve with a double seam.On top of the front and the bottom on the sides are pockets with flap. Central zip on webbing, decorated placket. Dress is also attached with a waistband with buckle. The length on the middle of the back in the finished garment at size 44 at growth 164-170 is 95 cm (gorge is made more profound to 1 cm).The length of ready-made dress by the average seam of the back from waist to bottom in size 44 at height 164-170 is 70 cm.    

Fabric suggestion: Suit or high-count fabrics with a little stretching, dense jersey.

Fabric consumption:Fabric width is 140-150 cm, the top length of fabric is 2.60 m. – 2.80 m. Fabric consumption is given in case of sewing or cutting mistake. Pattern pieces should be placed on the fold of a piece of fabric.

Level of difficulty - "Advanced Beginner"

Sewing instruction is attached to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order wiil be in two print version:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns are located on a sheet measuring 60 * 280 cm.

Presented is a photo of dress from Dsquared Pre Fall 2016 for visual demonstration of pattern №354

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.