Dress, pattern №363

To set up printing of pattern on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Dress pattern.Close-fitting dress, cutting through the waist, below the knee length. There are average seam with the cut on the bottom, waist darts and sidebody on the front. The back with the average seam. On the back, there are waist and shoulder darts. The waist decorated by faced belt. Set-in-sleeve, single seam sleeve. There is a clasp on the snap fasteners on the shoulder seam. Adjoining band-collar. On the left side seam, there is a clasp on the zipper tape. The length of ready-made garment to the middle of the back in 44 size at growth 164-170 cm is 108 cm (gorge made more profound to 0,5 cm).The length from the waistline by the skirt of back in ready-made pinafore dress in size 44 at height 164-170 is 73 cm. 

Fabric suggestion: Suit and dense dress fabrics with little stretching, tight jersey. 

Fabric consumption. Fabric width is 140-150cm, the length is 1,90 m – 2,10 m.

Fabric consumption is given in case of sewing or cutting mistake.  Pattern pieces should be placed on the fold of a piece of fabric.

Pattern is given with seam allowances.

Degree of difficulty - “Advanced Beginner”

Sewing instruction is atteched to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns are located on a sheet measuring 60 * 179 cm.

Presented a photo of dress from BURBERRY PRORSUM Pre Fall 2016 for visual demonstration of pattern №363

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.