Dress, pattern №374

To set up printing of pattern on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Dress pattern. Semilying dress with band-collar and with a cut-off low waistline. There are waist and chest darts on the front. The top of front with cut-off yoke and pocket. The bottom of front with an additional segmentation at the bottom of the skirt. On the skirt there is processed the pocket in the seam. The central hook is on the zipper tape. The back is on the cut-off yoke with waist darts. In the left side seam there is a cut on the zipper tape. Sleeve length to the wrist, stitched on cuff, with one pintuck on the bottom. The length of ready-made garment to the average seam of back in 44 size at growth 164-170 cm is 84 cm (gorge made more profound to 26 mm). 

Fabric suggestion: Denim medium density without stretching or with slight stretching. And fabrics for dresses with similar properties.

Fabric consumption: Fabric width is 140-150 cm, the length is 1,6 m – 2,0 m. Fabric consumption is given in case of sewing or cutting mistake. Pattern pieces should be placed on the fold of a piece of fabric.  

Pattern is given with seam allowances.

Level of difficulty - “Advanced Beginner”

Sewing instruction is attached to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order wiil be in two print version:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns are located on a sheet measuring 60*214 cm.

Presented is a photo of dress from Tomas Maier resort 2017 collection for visual demonstration of pattern №564.

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.