Dress, pattern №387

To set up printing of pattern on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Dress pattern. Slimline dress with a cut-off low waistline along the front.  There are reliefs of armhole on the front. On the front skirt there is average seam with a cut. Into the seam of component the bodice with front skirt are processed flaps. The back with the average seam and waist darts. The clasp on the zipper tape in the average seam of the back. Raglan sleeve, up to the middle of the forearm. With shoulder pads. The length of ready-made garment on the average seam of the back in 44 size at growth 164-170 cm is 92 cm (gorge is made more profound to 42 cm).

Fabric suggestion: Suit and dress fabrics with medium density without stretching or with little stretching. For sleeves it is recommended to use the lace. 

Fabric consumption:   Fabric width is 140-150cm, the length of the top is 1,2 m – 1,5 m, the lining is 0,9m – 1,1m. Fabric consumption is given in case of sewing or cutting mistake. Pattern pieces should be placed on the fold of a piece of fabric.  

Pattern is given with seam allowances.

Degree of difficulty - “Advanced Beginner”

Sewing instruction is atteched to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns of top are located on a sheet measuring 60*175 cm. The patterns of lining are located on a sheet measuring 60*138 cm.

Presented a photo of dress from Oscar de la Renta  2015/2016 collection for visual demonstration of pattern №387.

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.