Dress, pattern №452

To set up printing of pattern N452 on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Dress pattern. Dress with an adjacent silhouette, with a tapered extension at the bottom and a cut-off waistline. On the front part there is a double gathered yoke, decorated with a flounce and ruffles. Upper part of the back has a centre seam, waist and shoulder darts. A set-in sleeve has a gathering in the upper part of the cap. The bottom of the sleeve is decorated with a flounce, gathered at the wrist with an elastic thread. Zip fastening at the side seam. Front yoke has a central button fastening and hinged loops. The neckline is finished with bias tape with ties at the ends.

General increases, laid in the pattern: Bust-line: 9 см, Waist-line: 8.5 см, Shoulders: 11.5 см

Finished back length along the center back seam, см.: 38 size: 59,0 – 62,6, 40 size: 59,1 – 66,5, 42 size: 59,2 – 66,6, 44 size: 59,3 – 66,7, 46 size: 59,4 – 66,8, 48 size: 59,5 – 66,9,  50 size: 59,6 – 67,0, 52 size: 59,7 - 67,1

Fabric suggestion: for this garment we recommend using light dress non-stretch or slightly stretchy fabrics, as well as chiffon for sleeves and decoration. These can be natural or synthetic fabrics.

Main fabric, wide 140 cm (garment made of one type of fabric): 38 size: 2,25 – 2,35 м, 40 size: 2,25 – 2,45 м, 42 size: 2,3 – 2,5м, 44 size: 2,5 – 2,7 м,  46,48 size: 2,55 – 2,75 м, 50,52  size: 2,6 - 2,8 м.

Main fabric, wide 140 cm (garment with chiffon sleeves): 38 size: 1,6 – 1,7 м, 40 size: 1,65 – 1,85 м, 42,44 size: 1,7 – 1,9 м, 46,48 size: 1,8 – 2,0 м, 50 size: 1,85 – 2,05 м, 52  size: 1,9 - 2,1 м.

Laying scheme of chiffon details, wide 140 сm (garment with chiffon sleeves): 38-52 size: 0,95 -1,0 м.

Pattern is given with seam allowances.

Degree of difficulty - “Intermediate”

The photos shows a dress sewed at the GRASSER  for pattern № №452

Model is wearing a dress size 42, height 170-176.  Model parameters: Bust-line: 82, waist-line:61, Hips: 90, height 171.

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

For sewing you will need the following equipment:

• Multipurpose sewing machine;

• Non steam iron (additionally you may use a special iron to fuse seams);

• Regular presser foot;

• Wooden iron;

• Ironing desk or console table;

• Hand needle for basting;

• Machine needles Microtex №80;

• Paper scissors;

• Scissors for textile cutting;

• Eyelet press for installing eyelets and press studs, depending on the diameter

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.