Dress, pattern №461

To set up printing of pattern on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Dress pattern. Dress on lining, fit silhouette, with conical extension to the bottom, length to the floor. The garment with an open back, shoulder straps, with a cutting waistline. The front is with French darts. The skirt of dress is with yoke, the front yoke has figured form. Back of the skirt has a small tail; if you want you can make the bottom flat. In the average back seam there is a clasp on zipper tape. The length of ready-made dress by the average seam of the back from waistline taking into account the tail in size 44 at growth 164-170 is 121,0 cm. Stitch shaping by the waist is 3,0 cm (in total volume - 6,0 cm).

Fabric suggestion: dress and suit fabrics without stretching, well-shaped; lining fabrics.

Fabric consumption:   Fabric width is 140-150cm, the length of the top fabric is 3,30 m – 3,60 m, the length of lining is 1,40 m – 1,60 m. Fabric consumption is given with margin in case of sewing or cutting mistake.

Pattern is given with seam allowances.

Degree of difficulty - “Advanced Beginner”

Sewing instruction is atteched to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns are located on a sheet measuring 60*262 cm.

Presented a photo of dress from Jason Wu collection for visual demonstration of pattern №461.

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.