Dress, pattern №510

To set up printing of pattern N510 on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Dress pattern. Semiadherent dress on the lining with asymmetrical reliefs and single cut sleeve, the length to the ankle. In the figured front middle seam on the one side, there is a soft coattail. In the average back seam is a clasp on the zipper tape and the cut. The left relief is also with a cut at the bottom. Single cut sleeve with a length of ¾, with a cut-off bottom. The neck is a V-neck. 

The length of ready-made dress by the average back seam from the waistline in size 44 at growth 164-170 is 120,0 cm (gorge made more profound to 1,0 cm). 

Stitch shaping by the chest is 5,0 cm (in total volume - 10,0 cm), stitch shaping by the waist is 5,5 cm (in total volume -11,0cm), stitch shaping by hips without coattail is 3,0 cm (in total volume - 6,0cm), stitch shaping by shoulder circumference is 15,0 cm.

Fabric suggestion: Flexible saxony fabrics; lining fabrics. Also, if desired, you can use a dense jersey, in which case the garment is likely to get freer - you may need volume corrections on the fitting.

Fabric consumption: Fabric width is 140-150cm, the length of fabric of all top details is 2,90 m – 3,40 m. The length of fabric by colors: for details «front 2» and «back 2» is 1,40 m - 1,60 m; for details «front 3» and «back 3» is 1,40 m -1,60 m; for other details is 1,30 m – 1,50 m. The length of lining fabric is 1,50 m - 1,70 m.

Fabric consumption is given with margin in case of sewing or cutting mistake. Pattern pieces of the top fabrics should be in expanded form. Pattern pieces of lining should be place on the fold of a piece of fabric.

Pattern is given with seam allowances.

Degree of difficulty - “Advanced Beginner”

Sewing instruction is attached to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns of top are located on a sheet measuring 60*274 см. The patterns of lining are located on a sheet measuring 60*165 см.

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.