Dress, pattern №514

To set up printing of pattern N514 on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Dress pattern. Fitted dress, cutting along the waist line. The central part of the front bodice single cut with a skirt. The skirt is conical. In the skirt reliefs there are inclined pockets with finishing laps. The front skirt under the lap is with a bi-swing pleat. Back is with darts on bodice and average seam. Reglan sleeve with upper seam, length below the elbow. The sleeve expands in the lower part and has single cut bow ties. Over the bow along the upper seam of the sleeve is a small bi-swing pleat. Wide boat neckline. The clasp is hidden button panel on 9 loops and buttons, with a stitched placket.

The length of ready-made dress by the average back seam from the waistline in size 44 at growth 164-170 is 100 cm. 

Total stitches shaping:  by the chest is 9,5 cm, by the waist is 9 cm.

Fabric suggestion: Flexible, well draped dress fabrics without stretching or with a small stretching.

Fabric consumption: Fabric width is 1,4m: fabric consumption is 2,9 m – 3,4 m, pattern pieces should be in expanded form.  

Pattern is given with seam allowances.

Degree of difficulty - “Advanced Beginner”

Sewing instruction is attached to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns are located on a sheet measuring 60*231 см.

Photo of a dress from the Carolina Herrera SS 2017 collection for visual demonstration of model pattern No.514 from the GRASSER design bureau.

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.