Dress, pattern №760

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Dress pattern. It’s a slim-fit below the knee dress with skirt. Dress has lining and there are pockets in side seams. Breast and shoulder darts are transferred into the pleating of the neck hole area. Front of bodice has shaped vents in the waist area. Back of bodice has vent in the waist area and central fastener with 16 buttons and 16 loop buttonholes. Waistline of the dress is slightly pleated with usage of a drawstring and a belt. Skirt of the dress has multiplex construction: yokes have big conical expansions while skirt itself has straight silhouette so there is slightly broken line in the area of side seams where yokes are sewed on. Yokes have shaped vents and slight pleating in the waistline area. Elbow length sleeves are quite loose-fitting and magyar, they are slightly pleated at the hemline, and hemline has facing (inner cuff). 

There are two design versions of this dress, each has different design of waistline area. 

Design № 1 (dress with opened sides): dress has vents in the waistline areas of front and back (without an inset). 

Design № 2 (closed dress): dress has an inset in the waistline areas of front and back. 

General increases, laid in the pattern: Bust-line: 8 см + model’s widening; Waist:: 0 (model without an inset); 8 см (model with an inset); Hips-line: 5,0 см + model’s widening;  Shoulders: 15 см + model’s widening.

Finished back length along the center back seam, см.:  38 size: 121,7-136,8, 40 size: 121,9-137,0, 42 size: 122,1-137,2, 44 size: 122,3-137,4, 46 size: 122,5-137,6, 48 size: 122,7-137,8,  50 size: 122,9-138,0, 52 size: 123,1-138,2

Fabric suggestion: we recommend to use dress fabrics without stretching ratio that keep their shape well. It can be linen, cotton, viscose or semisynthetic, synthetic or blended fabrics. We recommend to use viscose or silk as lining. 

Materials for sewing this model: natural linen and polyviscose lining material, you can purchase in our online store -  https://grasser.ru/tovary-dlya-shitya/tkani/ 

Main fabric, wide 140 cm (without an inset): 38-42 size: 3,20-3,40м, 44-52 size: 3,25-3,45м  

Main fabric, wide 140 cm (with an inset): 38-42 size: 3,30-3,50м, 44-50 size: 3,35-3,55м

Lining fabric, wide 140 cm: 38-52 size: 1,45-1,60м

Pattern is given with seam allowances.

Degree of difficulty - “Advanced”

The photo shows a dress sewed at the GRASSER  for pattern N760

Model is wearing a size 42 dress, height 164-170. Model parameters: Bust-line: 82, waist-line: 60, Hips:  92, height 169

We sewed a dress from linen from our online store - https://grasser.ru/tovary-dlya-shitya/lyen_naturalnyy/

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

For sewing you will need the following equipment:

• Multipurpose sewing machine;

• 3 thread overlock machine;

• An iron with or without steam;

• Regular presser foot;

• Hinged cording foot;

• Invisible zipper foot;

• Sleeve board;

• Wooden iron;

• Ironing desk or console table;

• Hand needle for basting;

• Machine needles № 80-90;

• Paper scissors;

• Scissors for textile cutting.
  

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. Top details for size 52 are located on 2 sheets of 60 x 196 cm.The details for top for size 52 are located on a sheet of 60 x 159 cm.

A test square for checking the plotter scale is located on the pattern sheet.