Dress in 2 designs, pattern №764

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Dress pattern. It’s a slim fit without sleeves dress. Dress has A-line skirt and set-in waistband. Top part of front is given in two different designs: first one has 7 topstitched pinched pin tucks on each side, breast dart and waist dart that is located under the pleat; second design has no pin tucks, slopes and locations of breast and waist darts are adjusted. Central fastener of both design versions has 7 loop buttonholes and 7 buttons. Back has central seam, shoulder dart is transferred into the ease of shoulder edge. There are two waist darts on the bottoms of front and back on each side. There is a blind zipper in the central seam of back. There are also two pelerine of two different designs: short one with a neckband with loop buttonhole and 1 button; second one has elongated back part, neckband and ties.

General increases, laid in the pattern: Bust-line:  6,5 см, Waist:  6,0 см, Hips-line: 8,0 см

Fabric suggestion:  we recommend to use thin well-being draped dress fabrics without stretching. It can be natural, semisynthetic, synthetic or blended fabrics.

Amount of fabrics:

Main fabric, wide 140 cm ( if pelerine is excluded): 38 size:1,9 – 1,95м, 40 size: 1,9 – 2,0м, 42-44 size: 2,0 – 2,1м, 46-48 size: 2,1 – 2,2м, 50-52 size: 2,3 - 2,4м

Main fabric, wide 140 cm(with pelerine 1): 38 size:2,3 – 2,4м, 40 size: 2,4 – 2,6м, 42 size:2,5 – 2,7м, 44 sizeр: 2,6 – 2,8м, 46-48 size: 2,7 – 2,9м, 50-52 size: 2,8 -3,0м

Main fabric, wide 140 cm (with pelerine 2): 38 size:2,5 – 2,6м, 40 size: 2,6 – 2,8м, 42 size:2,6 – 2,8м, 44 size: 2,6 – 2,8м, 46-48 size: 2,9 – 3,1м, 50-52 size: 3,0 -3,2м

Main fabric, wide 140 cm (separate from pelerine 1): 38-52 size: 0,6м

Pattern is given with seam allowances.

Degree of difficulty - “Advanced”

The photo shows a dress sewed at the GRASSER  for pattern N764

We sewed the first design of the dress from suiting fabric, composition: 50% cotton, 47% viscose, 5% elastane.

We sewed the 2nd design of the dress from twill, 100% silk.

Model is wearing a size 42 dress, height 164-170. Model parameters: Bust-line: 83, waist-line: 62, Hips:  92, height 170

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• 3 thread overlock machine;
• An iron with or without steam;
• Regular presser foot;
• Hinged cording foot;
• Invisible zipper foot;
• Wooden iron;
• Sleeve board;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles №80/90;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. Details for size 52 are located on 2 sheets 200 на 60 см.

A test square for checking the plotter scale is located on the pattern sheet.