Dress, pattern №843

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Dress pattern.  A dress with a waistline seam falls above the ankle. The bodice has a deep asymmetric neckline that opens the left shoulder, the neckline is decorated with a placket with 2 sewn buttonholes and buttons (on the left shoulder). On the right shoulder, there is a cutout from the placket to the sleeve. The waist is gathered with an elastic band. 

The dress has an A-line skirt with side inseam pockets. There is the center seam on the back of the skirt that ends with a vent. Set-in double-seam sleeves are of length of 7/8, with curly seams, with upper and lower seams (based on a one-piece sleeve). The upper seam on the right sleeve is shifted to the front.

Eases added to a pattern, cm:  Bust-line: 17  cm; Hips-line: 20 cm+ model’s widening.

Finished length along the center back seam, см: 38 size: 81,8-92,1, 40 size: 81,9-92,2, 42 size: 82,0-92,3, 44 size: 82,1-92,4, 46 size: 82,2-92,5, 48 size: 82,3-92,6,  50 size: 82,4-92,7, 52 size: 82,5-92,8, 54 size: 82,6-92,9, 56 size: 82,7-93,0.

Fabric suggestion: we recommend using dress fabrics, thin suit fabrics, that hold the shape well, stretch-free or with a little stretching ratio. In terms of composition, it can be linen, cotton, viscose, as well as fabrics made of synthetic or blended fibers.

Amount of main fabric, wide 140 cm: 38-42  size: 2,40-2,50м, 44-48  size: 2,50-2,70, 50-56  size: 2,70-2,95м.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Pattern is given with seam allowances.

Degree of difficulty - "Intrmediate”

The photos shows a dress sewed at the GRASSER  for pattern №843

Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 83см, waist-line: 61см, Hips: 88см, height 173 см

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• 3 thread overlock machine;
• An iron with or without steam;
• Regular presser foot;
• Hinged cording foot;
• Wooden iron;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles №80;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.