Dress, Pattern № 327

To set up printing of pattern on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Dress pattern. Trapezoidal dress below the knee with the belt. Asymmetric zip with stitched plackets on loops and buttons is processed on the front. The yoke on the back turning to the front, middle seam and vertical reliefs. The vertical reliefs on the right of front, coming from the armhole towards the center of the bottom. The vertical reliefs on the left of front coming into the zip. Set-in sleeve to the elbow with wide decorative turndown. The collar stands up and turns down on the tear-off neckband. The length of average of the back (to middle seam and yoke) in 44 size is  107 cm at growth 164-170 cm (gorge is made more profound to 1 cm).  

Fabric suggestion: Lightweight stretching or slightly-stretching drapey fabrics. We offer to sew the garment in a single fabric. You can use different fabrics, like chiffon velvet, organza.

Fabric consumption:  Fabric width is 140-150 cm, the top length of fabric is 1,70 m – 1,90 m. Fabric consumption is given in case of sewing or cutting mistake. Pattern pieces should be in expanded form. 

Pattern is given with seam allowances.

Level of difficulty - “Advanced Beginner”

Sewing instruction is attached to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order wiil be in two print version:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns are located on a sheet measuring 60*178,5 cm. Sizes 38-40 (158-164), 38-42 (164-170) on a sheet of size 60 * 322 cm.