Dress, pattern №719

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Dress pattern. This dress has a semi-fitted silhouette, falls below the knee, is lined. The front part has pintucks at the waist and a waistband with ties at the back. The back has pintucks at the waist and a waistband. The front panel of the skirt has a side part, which is one-piece with the back panel. The back part of the skirt has a yoke. The sleeve is short, one-piece with two seams with one-piece cuff. The dress has a pleated * trim at the lining hem.

* Please note that pleating is ordered in the atelier, do not do it yourself, see the section "List of parts for pleating” for more details about pleating.

General increases, laid in the pattern: Bust-line: 15,0 см, Waist: 10,0 см, Hips-line: 9,0 см, Shoulders: 10,0 см + модельное расширение

Finished back length along the center back, см.:  38 size: 93,2-108,5, 40 size: 93,5-108,8, 42 size: 93,8-108,1, 44 size: 94,1-108,4, 46 size: 94,4-109,1, 48 size: 94,7-109,4,  50 size: 95,0-109,7, 52 size: 95,3-110,0, 54 size: 95,6-110,3,  56 size: 95,9-110,6

Fabric suggestion: for this garment, we recommend using flexible dress fabrics and thin suiting non-stretching or slightly stretching fabrics that drape well. In terms of material, it can be silk, viscose, as well as fabrics from synthetic, semi-synthetic, or blended fibres. Lining – viscose, silk. For the pleating part we recommend using semi-transparent dress fabrics – chiffon, synthetic (before purchasing fabric, ask specialists in the atelier for recommendations on fabrics for pleating, not all fabrics may be pleated with the same results; also ask for recommendations on care for pleated fabrics)

ATTENTION! Choose fabrics that do not shine because the warp thread on the details is positioned differently.

Main fabric, wide 140 cm: 38 size: 2,50-2,70 м, 40,42 size: 2,55-2,70 м, 44 size: 2,60-2,75 м, 46 size: 2,60-2,85 м, 48 size: 2,65-2,85, 50 size: 2,65-2,95 м, 52 size: 2,70-3,00 м, 54 size: 2,80-3,05 м,  56 size: 2,90-3,15 м,

Lining fabric, wide 140 cm:  38,40 size: 0,95-1,10м, 42 size: 0,95-1,20, 44 sizeр: 0,95-1,30 м., 46 size: 1,10-1,45 м, 48 size: 1,25-1,55 м, 50,52,54,56 size: 1,40-1,60 м, 

Pattern is given with seam allowances.

Degree of difficulty - “Advanced”

The photos shows a dress sewed at the GRASSER  for pattern №719

Model is wearing size 42, height 164-170.  Model parameters: Bust-line:  83, waist-line: 62,  Hips: 92, height 170.

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• 3 thread overlock machine;
• An iron with or without steam;
• Regular presser foot;
• Wooden iron;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles №80 for the main fabric;
• Machine needles №70 for the lining;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. Details of top for size 56 are located on 2 sheets 60*205 см. Details of lining for size 56 are located on sheet 60*111 см.