Trousers, pattern №1199
Sizes:
-
size 38, height 152-158
-
size 38, height 158-164
-
size 38, height 164-170
-
size 40, height 152-158
-
size 40, height 158-164
-
size 40, height 164-170
-
size 40, height 170-176
-
size 40, height 176-182
-
size 42, height 152-158
-
size 42, height 158-164
-
size 42, height 164-170
-
size 42, height 170-176
-
size 42, height 176-182
-
size 44, height 152-158
-
size 44, height 158-164
-
size 44, height 164-170
-
size 44, height 170-176
-
size 44, height 176-182
-
size 46, height 152-158
-
size 46, height 158-164
-
size 46, height 164-170
-
size 46, height 170-176
-
size 46, height 176-182
-
size 48, height 152-158
-
size 48, height 158-164
-
size 48, height 164-170
-
size 48, height 170-176
-
size 48, height 176-182
-
size 50, height 152-158
-
size 50, height 158-164
-
size 50, height 164-170
-
size 50, height 170-176
-
size 50, height 176-182
-
size 52, height 152-158
-
size 52, height 158-164
-
size 52, height 164-170
-
size 52, height 170-176
-
size 52, height 176-182
-
size 54, height 152-158
-
size 54, height 158-164
-
size 54, height 164-170
-
size 54, height 170-176
-
size 54, height 176-182
-
size 56, height 152-158
-
size 56, height 158-164
-
size 56, height 164-170
-
size 56, height 170-176
-
size 56, height 176-182
-
-
Size:
- 38
- 40
- 42
- 44
- 46
- 48
- 50
- 52
- 54
- 56
Height:
- 152-158
- 158-164
- 164-170
- 170-176
- 176-182
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
The photos shows a trousers sewed at the GRASSER for pattern №1199.
Model is wearing a size 42. Model parameters: Bust-line: 84 cm, Waist-line: 63 cm, Hips: 93 cm, Height: 174 cm.
The photo also shows: longsleeve on pattern №1198, jacket on pattern №1102.
-
Waist-line: 6,6 сm.
Hips-line: 3,2 сm.
-
Size
38
40
42
44
46
48
50
52
54
56
Finished length along the side seam (without waistband), cm
83,6-92,3
83,8-101,2
84,0-101,4
84,2-101,6
84,4-101,8
84,6-102,0
84,8-102,2
85,0-102,4
85,1-102,5
85,2-102,6
Finished garment hem wid, cm
31,6
32,8
34,0
35,2
36,4
37,6
38,8
40,0
41,2
42,4
-
Main fabric. We recommend using pantsuits, suit fabrics, made of natural, synthetic or mixed fibers with a slight stretch, amenable to wet-heat treatment (pulling and shrinking are considered in some areas of the garment).
Lining material. As a lining for the details of the pocket lining, we recommend using pocket fabric or other lining fabrics suitable for pliable properties and density to the upper fabric made of natural, synthetic or mixed fibers. Cotton satin can also be used as a pocket fabric.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 33-39 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.
-
Amount of Fabrics in metres.
Size
38
40
42
44
46
48
50
52
54
56
Main fabric, wide 140 cm
1,00-1,10
1,05-1,25
1,05-1,25
1,10-1,30
1,15-1,30
1,20-1,35
1,20-1,45
1,45-1,60
1,55-1,80
1,65-1,95
Lining fabric, wide 140 cm
0,30
Interfacing (density 343-39 g/m2; width 150 cm)
0,30
Bias fusible tape with reinforcement stitches
0,35
0,40
Fusible on grain tape
0,75
0,80
0,85
0,90
0,95
1,00
1,00
1,05
1,10
1,15
Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories:
1. Plastic coil open-end zipper #4, 18 cm long - 1 pc.
2. Sew-on hook – 1 pc. -
1. Multipurpose sewing machine;
2. 3 thread overlock machine;
3. An iron with or without steam;
4. Regular presser foot;
5. Hinged cording foot;
6. Wooden iron;
7. Ironing desk or console table;
8. Hand needle for basting;
9. Machine needles №75-80;
10. Paper scissors;
11. Scissors for textile cutting. -
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!
A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter.
A test square for checking the plotter scale is located on the pattern sheet.
All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.
