Mini skirt, pattern №960

Sizes:

  • size 38, height 152-182
  • size 40, height 152-182
  • size 42, height 152-182
  • size 44, height 152-182
  • size 46, height 152-182
  • size 48, height 152-182
  • size 50, height 152-182
  • size 52, height 152-182
  • size 54, height 152-182
  • size 56, height 152-182
  • size 58, height 152-182
  • size 60, height 152-182
  • size 62, height 152-182
  • -

Size:

  • 38
  • 40
  • 42
  • 44
  • 46
  • 48
  • 50
  • 52
  • 54
  • 56
  • 58
  • 60
  • 62

Height:

  • 152-182
$8

After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".

Info

Comments

Questions

Mini skirt pattern. Mini skirt of moderate volume with a slight expansion along the bottom line, and with a length up to the middle of the thigh. Skirt with a one-piece waistband and five waistband loops. There is no side seam, the side part is modeled. The front part is with a waist dart and a flap welt pocket. The dart ends with a cut along the pocket entrance line. The back part is with a center seam. The center seam has a vent. The clasp is offset side with two rows. The first row is for sewing snaps, the second row is for a button loop and a button.


Eases added to a pattern, cm:

Bust-line – 24,0-29,0 (for all heights);
Hips-line – 12,0 (sizes 38 – 52);
                    15,0 (sizes 54 – 62).

Finished back length along the center back seam, cm: sizes 38-62: 45,0.


Fabric suggestion: We recommend using suit fabrics made of natural, synthetic or mixed fibers for this model. For this model, you can use denim fabrics, velvet, thin and medium-density coat fabrics with a variety of textures and densities, natural, artificial leather and suede.

Lining fabrics – use fabrics suitable for pliable properties and density to the upper material made of natural, synthetic or mixed fibers.

For better quality of sewing, we recommend to use the interfacing material. For example you may use 34 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density. 


Amount of Fabrics (in metres):

Main fabric, wide 140 cm: sizeы 38-62: 1,10.

Lining fabric, wide 140 cm: sizeы 38-48: 0,65, sizeы 50-54: 0,70, sizeы 56-62: 0,90.

Interfacing (density 34 g/m2; width 150 cm): sizeы 38-52: 0,70, sizeы 54-62.

Bias fusible tape with reinforcement stitches: size 38: 4,95, size 40: 5,05, size 42: 5,15, size 44: 5,20, size 46: 5,30, size 48: 5,40, size 50: 5,50, size 52: 5,60, size 54: 5,70, size 56: 5,80, size 58: 5,85, size 60: 6,00, size 62: 6,10.

Fusible on grain tape: sizeы 38-62: 0,35.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Garment accessories:

1. Buttons with the diameter of 20-25 mm – 2 pcs..

2. Sew-on snaps, diameter 15 mm – 2 pcs.


Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - "Intermediate


The photos shows a mini skirt sewed at the GRASSER  for pattern №960.

Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 86 cm, waist-line: 61 cm, Hips: 89,5 cm, Height: 176 cm.
The images also shows: trousers on pattern №906, jacket pattern №905, turtleneck sweater on pattern №893.


For sewing you will need the following equipment: 

Multipurpose sewing machine;
4 thread overlScissors for textile cutting.ock machine;
An iron with or without steam;
Regular presser foot;
Wooden iron;
Ironing desk or console table;
Hand needle for basting;
Machine needles Stretch №80 or Super Stretch №80;
Paper scissors.


The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.


2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.



Trousers, pattern №906
$9
Jacket, pattern №905
$10