Skirt, plus size, pattern №640

To set up printing of pattern N640 on A4 sheets, use "Test Square N2"! The test square is located on the first sheet in the pattern file.

---

Skirt pattern. Ankle length wrap skirt of a trapezoid silhouette. The upper detail of the front features a pintuck that goes along the wrap line. The back panel of the skirt has waistline darts. Also, the middle seam can be added to the back panel if desired. The waistline of the back panel and of the right front panel is finished with the sewn on waistband. The waistline edge of the left front panel is finished with the one-piece belt (it is part of the pattern). Upper edge of the left front panel is finished with the facing. The skirt fastens with the hidden sewn press-studs. Also, at the waistline area you can add binding strips, which can be fastened with buckles. These binding strips are stitched at the skirt waistline. The stitching is covered by belt loops. This additional fastening will decorate the design, as well as give extra fixation at the waistline. If you decide to add these strips, note that while fastening the left panel, your waistline area will gather a little bit. The right hip area of the skirt includes a pocket. The pocket is located on top of the two details - on the front and the back panels. 

General increases, laid in the pattern:  Waist-line: 1 см., Hips: 2 см.

Fabric suggestion: for this particular garment we recommend to use flexible dense delaine or broadcloth fabrics. Make sure the fabric is not transparent. 

Main fabric, wide 140 cm: 56 size: 2,00-2,20 м., 58,60 size: 2,30-2,50 м., 62,64 size: 2,50-2,70 м., 66,68,70 size: 2,70-2,90 м.

Pattern is given with seam allowances.

Degree of difficulty - “Middle”

---

The photo shows a skirt sewed for pattern №640

The image in the photo also contains a blouse according to pattern N665

---

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

For sewing you will need the following equipment:

• Multipurpose sewing machine;

• 3 thread overlock machine;

• An iron with;

• Ironing desk or console table;

• Buttonhole sewing machine or usual sewing machine with the buttonhole function.

---

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a  large-scale plotter. The patterns size 54 are located on sheet measuring  60*202 см.