Cape, pattern №1239
A loose-fitting, one-piece sleeve cape with a button closure at the back. Universal size from 38 to 62.
Suits for beginners
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
One size
-
-
Size:
- One
Free
Free pattern in PDF format. To download a free pattern you must log in or register
Info
Comments
Questions
-
A loose-fitting unlined cape with a one-piece sleeve. The length of the front is shorter than the length of the back. There is no shoulder seam, a shoulder dart is designed. There is no side seam. A cape is with a center seam. In the upper part of the center seam there is a 1-button closure and a hinged loop made of a cord. The neckline is round in shape, finished with a binding.
Model is wearing a size 42. Model parameters: Bust-line: 86 cm, Waist-line: 62 cm, Hips: 89 cm, Height: 173 cm. -
Size Indication on the diagram
One size
Finished back length along the center back seame, cm А 87,0 Finished front along the center front, cm В 18,0 Finished garment hem of front width, cm С 188,0 -
Main fabric. For this model, we recommend using fabrics, light, pliable, well-draped dress, blouse fabrics without stretching or with a slight stretch. In terms of composition, it can be silk, viscose, as well as fabrics made of artificial, synthetic or mixed fibers. A variety of silks, chiffons, and satins are suitable for this model.
-
Main fabric, wide 140 cm: 2,00 м
Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories:
1. Snank button with the diameter of 8-10 mm - 1 pc. -
- Multipurpose sewing machine;
- An iron with or without steam;
- Regular presser foot;
- Wooden iron;
- Ironing desk or console table;
- Hand needle for basting;
- Machine needles #70-75;
- Paper scissors;
- Scissors for textile cutting.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.
