All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.
Jacket pattern. This is a loose-fitting jacket with a straight silhouette, hits the hip line, insulated and lined. The central zip fastening is finished with an internal underlap placket. The shoulder line is extended by 4,0-6,0 cm (depending on the size of the garment). The front has a fitted yoke, patch pockets with a flap and slash pockets. The patch pocket has a zip fastener. The flap is located on the yoke line. The vertical slash pocket with a zip fastener is located along the side seam. The back has a fitted yoke and a centre seam. The sleeves are set in, of full length, with bottom and elbow seams. The sleeve hem is finished with an attached cuff, it height is 6,0 cm. On the front and back, along the hem line, on the inner side of the garment, there is a drawstring with adjustable fit, with a cord and clips. The cord is directed to the face through eyelets located at the side seams. The neckline of the garment is round, finished with a high collar band.
CONSTRUCTIVE EASE (EC)*:
Constructive ease consists of ease of package and ease of freedom.
Constructive ease is for a garment’s outer volume, ease of freedom is for a garment’s inner volume.
EC = EP + EF
We used 200 g/m2 density insulation material for our garment.
EASE OF PACKAGE (EP): 5.0 CM (May differ according to a material type).
EASE OF FREEDOM (EF):
Finished back length along the center back
Finished sleeve length (including cuff)
Main fabric. For this garment, we recommend using jacket fabrics, trenchcoat fabrics with or without various levels of textile impregnation, with membrane coating, with water-permeable coating or without coating, of different structure and density. In terms of composition, the fabrics may be made of natural, synthetic or blended fibres.
Lining material. We recommend using a synthetic fibre lining for membrane fabrics. Use lining made of synthetic, blended and natural fibres for trenchcoat and jacket fabrics. For pockets linings, we recommend using a fleece fabric with the density of 190 g/m2.
Insulation. To insulate the garment, we recommend using new generation synthetic insulations with a protective layer on both sides, for example, ISOSOFT 34 with the density of 200 gr/m2.
Interfacing materials. For better tailoring we recommend using a side booster with a non-adhesive density of 50 g/m2, a width of 90 cm.
Amount of Fabrics (in metres):
Main fabric, wide 140 cm
Lining fabric, wide 140 cm
Fleece, wide 150 cm
Insulation material (200 g/m2; width 140 cm)
Non-fusible facing straightener of
50 g/m2 and with the width of 90 cm
A hat cord, width 3 mm
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
1. Detachable metal zipper Type 5, length of 75-85 cm - 1 piece (for central fastening)
2. Non-separating metal zipper Type 5, length of 18-20 cm - 4 pieces (for front pockets)
3. Twisted plastic zipper Type 3, length of 18 cm - 1 piece (for the inner pocket)
4. Eyelets, diameter of 5 mm – 4 pieces
5. Stopper with two holes – 2 pieces.
Attention! To find the exact size of the zipper, check the pattern of your size and height.
Pattern is given with seam allowances.
Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.
Degree of difficulty - «Advanced».
The photos shows a jacket sewed at the GRASSER for pattern №1064.
Model is wearing a size 52, height 188-194. Model parameters: Bust-line: 103 cm, Waist-line: 82 cm, Hips: 102 cm, Height: 188 cm.
1. Multipurpose sewing machine; 2. An iron without steam; 3. Regular presser foot; 4. Hinged cording foot; 5. Wooden iron; 6. Ironing desk or console table; 7. Hand needle for basting; 8. Machine needles Microtex №80 for the main fabric; 9. Machine needles №80-90 for the lining; 10. Paper scissors; 11. Scissors for textile cutting; 12. Snaps pressing machine to install accessories grommets, depending on the diameter.
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!
A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter.
A test square for checking the plotter scale is located on the pattern sheet.
Sew with this goods
Men's pants, pattern №191
Men's trousers, pattern №501
Trousers, pattern №950
Sweatshirt, pattern №953
Dress, pattern №377
Dress, pattern №1004
Dress and Jumper, pattern №962
Shorts, pattern №1044
Sweatshirt, pattern №417
Briefs-shorts, pattern №994
Pinafore dress, pattern №582
Hoodie, pattern №874
All documents, multimedia and texts posted on en-grasser.com are works of authorship and are the property of Grasser Group Limited. All the information and products are provided to buyers for personal use. Resale of patterns and master classes is prohibited and prosecuted by law. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law. When copying text information, an active link to en-grasser.com is required. Every copy from the site en-grasser.com is tracked.