Jacket, pattern №870

Sizes:

size 38, height 152-158
size 38, height 158-164
size 38, height 164-170
size 40, height 152-158
size 40, height 158-164
size 40, height 164-170
size 40, height 170-176
size 40, height 176-182
size 42, height 152-158
size 42, height 158-164
size 42, height 164-170
size 42, height 170-176
size 42, height 176-182
size 44, height 152-158
size 44, height 158-164
size 44, height 164-170
size 44, height 170-176
size 44, height 176-182
size 46, height 152-158
size 46, height 158-164
size 46, height 164-170
size 46, height 170-176
size 46, height 176-182
size 48, height 152-158
size 48, height 158-164
size 48, height 164-170
size 48, height 170-176
size 48, height 176-182
size 50, height 152-158
size 50, height 158-164
size 50, height 164-170
size 50, height 170-176
size 50, height 176-182
size 52, height 152-158
size 52, height 158-164
size 52, height 164-170
size 52, height 170-176
size 52, height 176-182
size 54, height 152-158
size 54, height 158-164
size 54, height 164-170
size 54, height 170-176
size 54, height 176-182
size 56, height 152-158
size 56, height 158-164
size 56, height 164-170
size 56, height 170-176
size 56, height 176-182
-

Size:

Height:

152-158
158-164
164-170
170-176
176-182

$10

After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".

Info

Comments

Questions

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Jacket pattern. It’s a standard fit straight silhouette lower-the-hip length lined jacket. Shoulder line is enlarged, there are no side seams. Front details features a one-piece side part. Front comes with darts and pockets. First dart starts at the neckline and it’s placed under a lapel. Second dart starts from an armhole and finished at a pocket. Set-in pockets have flaps and facings. Center front closure comes with one button and one buttonhole. Hemline at the leading edges is rounded. Back has center seam, there is a vent in the center back seam. Set-in long sleeves are two-pieced, there is an opened vent in the elbow seam of a sleeve, the vent comes with four buttons and four buttonholes. The notched collar has a stitched to it collar stand. There are two design options of the lapel.

Eases added to a pattern, cm: Bust-line: 16,2 см, Waist: 14,6 см, Shoulders: 11 cm.

Finished length along the center back seam, сm:

Garment sector	38	40	42	44	46	48	50	52	54	56
Finished back length along the center back seam	68,4-74,6	68,4-80,8	68,5-80,9	68,5-80,9	68,6-81,0	68,6-81,0	68,7-81,1	68,7-81,1	68,8-81,2	68,8-81,2
Finished sleeve length	57,8-61,5	58,1-65,5	58,4-65,8	58,7-66,1	59,0-66,4	59,3-66,7	59,6-67,0	59,9-67,3	60,2-67,6	60,5-67,9

Fabric suggestion: we recommend to use suit cloths that are being shaped by steaming well, also you can use thin coating fabrics from natural, synthetic or blended fibers. Choose a lining cloth that are suitable for main fabric by its thickness and pliable properties. Lining cloth can be from natural, synthetic or blended fibers.

Size	38	40	42	44	46	48	50	52	54	56
Main fabric, wide 140 cm	1,55-1,70	1,60-1,80	1,65-1,85	1,65-1,85	1,70-1,90	1,75-1,95	1,80-1,95	1,85-2,10	1,85-2,10	1,90-2,15
Lining fabric, wide 140 cm	1,20-1,25	1,20-1,35	1,25-1,40	1,30-1,45	1,30-1,50	1,35-1,55	1,40-1,55	1,40-1,60	1,40-1,60	1,40-1,60
Fusible facing straightener (64 g/m2), 90 cm wide	0,30	0,35	0,35	0,35	0,35	0,35	0,35	0,35	0,35	0,35
Interfacing (55g/m2), 150 cm wide	1,15-1,25	1,15-1,30	1,15-1,30	1,15-1,30	1,15-1,30	1,20-1,35	1,20-1,35	1,20-1,35	1,20-1,35	1,20-1,35
Interfacing (34g/m2), 150 cm wide	0,85-0,90	0,85-1,00	0,85-1,00	0,85-1,00	0,85-1,00	0,90-1,05	0,90-1,05	0,90-1,05	0,90-1,05	0,90-1,05
Bias fusible tape with reinforcement stitches	3,10-3,20	3,10-3,40	3,20-3,50	3,20-3,50	3,30-3,60	3,40-3,60	3,40-3,70	3,50-3,70	3,50-3,80	3,60-3,90
Edge fusible tape	0,90-1,00	0,90-1,00	0,90-1,00	0,90-1,00	0,90-1,00	0,90-1,00	0,90-1,00	0,90-1,00	0,90-1,00	0,90-1,00

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Accessories:
1. 25-30 mm diameter button – 1 piece.
2. 10-15 mm diameter button – 8 pcs.
3. 10 mm thick shoulder pads – 1 pair.
4. Sleeve head – 1 pair.

Pattern is given with seam allowances.

Degree of difficulty - "Advanced”

The photos shows a jacket sewed at the GRASSER for pattern №870

Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 83 см, waist-line: 62,5 см, Hips: 86 см, height 172 см

The images also shows: trousers on pattern №700, knitted jacket on pattern №728, skirt on pattern №867, blouse on pattern №884, dress on pattern №1140, jeans on pattern №1098, shirt on pattern №1046, sweatshirt on pattern №724, skirt on pattern №1167, blouse on pattern №1104.

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS!

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

For sewing you will need the following equipment:

Multipurpose sewing machine;
An iron with or without steam;
Regular presser foot;
Hinged cording foot;
Wooden iron;
Sleeve board;
Ironing desk or console table;
Hand needle for basting;
Machine needles №75-80 for the main fabric;
Machine needles № 70 for the lining;
Paper scissors;
Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter.

A test square for checking the plotter scale is located on the pattern sheet.

All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.