All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.
Shirt pattern. The shirt has a moderate volume, with a semi-fitted silhouette, of hip length, with a shaped bottom line. The front has yokes patch yokes and patch pockets with flaps. The flap has a one-button fastening. In sizes 38 to 50, the front part has an ease at the top of the side edge, in sizes 52 to 56, it has chest darts in the side seam. The back part has a patch yoke. The centre fastening has cut-off plackets with seven buttons. The sleeve is set in, with a single seam, of shirt type. The lower edge of the sleeve with one soft pleat is finished with a cuff. The sleeve slit is decorated with a placket with one-button fastening. The cuff fastening has two buttons. The stand-up collar with a cut-off stand has a one-button fastening.
Eases added to a pattern, cm:
Size / The amount of ease
Finished back length along the center back
Finished sleeve length (including cuff)
Main fabric. For this garment, we recommend using fabrics with diagonal weave, dress and shirting fabrics, thin suiting fabrics, non-stretch or slightly stretchy one, made of natural, synthetic or mixed fabrics. For the given garment, you may use various denim, cotton fabrics with different density.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 33 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.
Amount of Fabrics (in metres):
Main fabric, wide 140 cm
Interfacing (density 33 g/m2;
width 150 cm)
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once. Garment accessories:
1. Snap buttons or buttons with diameter of 10-12 mm – 14 pcs.
Pattern is given with seam allowances.
Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.
Degree of difficulty - "Intermediate".
The photos shows a shirt sewed at the GRASSER for pattern №1046.
Model is wearing a size 42. Model parameters: Bust-line: 81 cm, Waist-line: 61 cm, Hips: 91 cm, Height: 173 cm.
1. Multipurpose sewing machine;
2. 3 thread overlock machine;
3. An iron with or without steam;
4. Regular presser foot;
5. Wooden iron;
6. Ironing desk or console table;
7. Hand needle for basting;
8. Machine needles №80-90;
9. Paper scissors;
10. Scissors for textile cutting;
11. Snaps pressing machine to install accessories press studs, depending on the diameter.
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!
A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter.
A test square for checking the plotter scale is located on the pattern sheet.
Sew with this goods
Trousers, pattern №197
Trousers with 2 pocket options, pattern №834
Skirt, pattern №920
Skirt, pattern №963
Men’s raincoat, pattern №823
Overall (Jumpsuit), pattern №653
Dress, pattern №778
Jacket, pattern №956
Turtleneck, pattern №709
Blouse, pattern №476
All documents, multimedia and texts posted on en-grasser.com are works of authorship and are the property of Grasser Group Limited. All the information and products are provided to buyers for personal use. Resale of patterns and master classes is prohibited and prosecuted by law. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law. When copying text information, an active link to en-grasser.com is required. Every copy from the site en-grasser.com is tracked.