Men's hoodie, pattern №49

To adjust the print scale, use the Test square! The test square for checking the A4 scale is located on the first sheet in the A4 pattern file. The test square for checking the print scale on the plotter is located on the sheet with the details of the pattern in the file for the plotter.

Men's hoodie pattern:  A fitted hoodie, length up to the hip line. There is a vertical relief along the front, starting from the shoulder. On the sides of the front there are welt pockets. The side zip fastening, located in relief on the right side of the front. A set in and single-seam sleeve. The hood has a middle seam. The bottom of the garment is finished with a sewn-in waistband, 5.5 cm high. The bottom of the sleeve is finished with a fitted cuff, 5.5 cm high.

Finished back length along the center back, см: 44-58 size: 63,0 – 69,0 см.

Fabric suggestion: we recommend using a sweatshirt jersey for this model. By composition, it can be cotton or cotton in combination with other fibers. When making this garment from thick, dense knitted fabric, we recommend using a t-shirt fabric for the details of the upper lining of the pocket. By composition, it can be cotton or cotton in combination with other fibers. The lining material must be selected with a stretching ratio corresponding to the upper material.

Amount of main fabric 140 cm wide: 44 size: 1,90-2,05 м; 46 size: 2,00-2,15 м; 48 size: 2,05-2,20 м; 50 size: 2,10-2,25 м;  52 size: 2,20-2,35 м;  54 size: 2,25-2,40 м; 56 size: 2,35-2,50 м; 58 size: 2,40-2,55 м.     

Amount ofain fabric 180 cm wide: 44 size: 1,55-1,65 м; 46 size: 1,60-1,70 м; 48 size: 1,65-1,75 м; 50 size: 1,70-1,80 м;  52 size: 1,75-1,85 м;  54 size: 1,80-1,90 м; 56 size: 1,80-1,95 м; 58 size: 1,85-2,00 м.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Pattern is given with seam allowances.

Degree of difficulty - “Intermediate”

The photo shows hoodie sewed at the GRASSER  for pattern №49

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• 4 thread overlock machine;
• An iron with or without steam;
• Regular presser foot and
• One-legged machine foot;;
• Ironing desk or console table;
• Wooden iron;
• Hand needle for basting;
• Machine needles Stretch No 80 or Super Stretch No 80;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order is in two print options:

1. For printing on A4/Letter. It is necessary to print out a pattern on an ordinary printer on A4/Letter sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a  large-scale plotter. 

The test square for checking the print scale on the plotter is located on the sheet with the details of the pattern.