Vest, pattern №1275
Requires experience
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
size 38-42, height 152-164
-
size 38-42, height 164-170
-
size 38-42, height 170-182
-
size 44-48, height 152-164
-
size 44-48, height 164-170
-
size 44-48, height 170-182
-
size 50-54, height 152-164
-
size 50-54, height 164-170
-
size 50-54, height 170-182
-
size 56-62, height 152-164
-
size 56-62, height 164-170
-
size 56-62, height 170-182
-
-
Size:
- 38-42
- 44-48
- 50-54
- 56-62
Height:
- 152-164
- 164-170
- 170-182
$8
$10
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
A moderate volume vest of a straight silhouette, thigh-length, lined.
The central side closure has 5 button loops and 5 buttons. The bottom edge of the leading edge is with bevelled corners. The front details are with armhole princess seams, waist darts and pockets with facings. The detail of the right front has two pockets. The pockets are located in the downside part, one above the other, the length of the upside pocket is limited by a waist dart. The left front detail is with one pocket at the bottom part and one breast pocket. The breast pocket is decorative, the upside pocket is welt, the bottom pockets are available in 2 options. In option 1, the bottom pockets are decorative, in option 2, the bottom pockets are slotted. The back is with a center seam and armhole princess seams. The bottom line has beveled corners along the center of the back. In the upside part of the side seam, in two rows, there are details of straps with a half-ring closure. The fastener of the straps can be decorative or used to adjust the volume. The neckline cutout of the front has a V-shape.
Model is wearing a size 42. Model parameters: Bust-line: 86 cm, Waist-line: 64 cm, Hips: 92 cm, Height: 175 cm. -
Bust-line: 37,0 cm.
Hips-line: 34,0 cm.
-
Size 38 - 42 44-48 50-54 56-62 Completed garment’s length along the back centre seam
(including the height of the slit)61,4-65,4 61,6-65,6 61,8-65,8 62,0-66,0
-
Main fabric. For this model, we recommend using dress and suit fabrics, suit fabrics of medium thickness and density, without stretching or with slight stretching, amenable to wet-heat treatment from natural, synthetic or mixed fibers.
Lining material. As a lining fabric, use fabric suitable for pliable properties and density to the upper material made of natural, synthetic or mixed fibers.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 33-34 g/m2 density 150 cm, width woven interfacing.
The density of the interfacing material depends on the main fabric density.
-
The amount of fabric in meters.
Size 38 - 42 44-48 50-54 56-62 Main fabric, wide 140 cm 1,15-1,20 1,20-1,25 1,30-1,35 1,35-1,40 Lining material, wide 140 cm 0,75-0,80 0,80-0,85 0,80-0,85 0,85-0,90 Interfacing (density 33-34 g/m2; width 150 cm) 0,95-1,05 1,05-1,15 1,15-1,25 1,25-1,35 Bias fusible tape with reinforcement stitches 3,40-3,50 3,60-3,70 3,85-3,95 4,10-4,20 Fusible on grain tape 1,35-1,45 1,40-1,50 1,45-1,55 1,55-1,60
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories: 1.Button with the diameter of 18-20 mm - 5 pcs. (for a center closure).2. D-ring, metal, with inner width 20 mm - 4 pcs. (for straps).
-
- Multipurpose sewing machine;
- An iron with or without steam;
- Regular presser foot;
- Wooden iron;
- Ironing desk or console table;
- Hand needle for basting;
- Machine needles #80-85 for the main fabric;
- Machine needles #70 for the lining;
- Paper scissors;
- Scissors for textile cutting.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.
