Insulated coat, pattern №707

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Coat pattern. A slightly loose fit coat, length below the knee line, with a hood, fully lined and insulated. There is a front zip fastening; a metal zipper is open-end with one or two separators; with a sewn-in placket with six snap buttons and an inner windproof placket. There are two front welt pockets with a flap. The back part has a center seam. Long, double-seam, raglan sleeves. The coat has a stand-up collar. The hood is helmet-shaped, with a cut-off central part, with a two-button fastening, and a drawstring in the front of the hood and a flat cord. There are two grommets for the cord at the front of the hood at the level of the chin. At the ends of the cord there are tips. The hood is detachable, fastened at the neckline with 5 loops and 5 buttons. A drawstring fastening waist coat with a flat pull-out cord. There are two grommets on the central part of the front at the waist level.

Eases added to a pattern, cm:  *Constructive ease (Ec)*: Bust-line: 22 см, Hips: 13,5 см, Shoulders: 14,5 см

*Ease of package (Ep)*: Bust-line: 4 см; Hips: 4 см; Shoulders:  4 см.

*Ease of freedom (Ef): (Pay attention to this increase in order to estimate the garment volume!): Bust-line: 18 см; Hips: 9,5 см;  Shoulders:  10,0 см.

Finished back length along the center back seam, cm: 38 size: 104,6-118,6, 40 size: 104,8-118,8, 42 size: 105,0-119,0, 44 size: 105,2-119,2, 46 size: 105,4-119,4, 48 size: 105,6-119,6,  50 size: 105,8-119,8, 52 size: 106,0-120,0

Fabric suggestion: for this model we recommend using waterproofing membrane fabrics, thin trench coat fabric, or puffer coat fabric.

Choose insulating material:

- Watteline Rotrand black, 50% wool, 50% viscose, 160g/m2, 140 cm;

- Watteline VTL white, 70% wool, 30% viscose, 200g/m2,140 cm;

- ISOSOFT 34 100 g/m2, 140 cm.

Lining fabric: viscose, silk.

Amount of main fabrics, wide 140 cm: 38,40 size: 3,20-3,40 м., 42 size: 3,30-3,50 м, 44 size: 3,35-3,55м., 46 size: 3,45-3,65 м., 48,50 size: 3,50-3,70 м., 52 size: 3,55-3,75 м.

Lining fabric, wide 140 cm: 8,40 size: 2,15-2,35 м., 42 size: 2,20-2,40 м., 44 size: 2,25-2,45 м., 46 size: 2,30-2,50м., 48, 50 size: 2,35-2,55 м., 52 size: 2,40-2,60 м.

Insulation, wide 140см: 38,40 size: 2,85-3,05 м., 42 size: 2,90-3,10 м., 44 size: 2,95-3,15 м., 46 size: 3,00-3,20 м., 48, 50 size: 3,05-3,25 м., 52 size: 3,10-3,30 м.

Pattern is given with seam allowances.

Degree of difficulty - "Advanced”

The photos shows a coat sewed at the GRASSER pattern №707

Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 84,5см, waist-line: 64,5см, Hips: 86см, height 171 см.

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
  
• An iron with or without steam –
• for wet-heat treatment of the lining;
• Ironing desk or console table –
• for wet-heat treatment of the lining;
• Two-legged machine foot, walking or Teflon machine
• foot (depending on the raincoat fabric type),
• One-legged machine foot
• Hand needle for basting;
• Machine needles Microtex №80;
• Paper scissors;
• Scissors for textile cutting;
• Eyelet press for installing eyelets and press studs, depending on the diameter.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.