Insulated coat, pattern №881

Use the Test Square to adjust the print scale! A test square for checking the A4/Letter scale is located on the first sheet of the A4/Letter pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Insulated coat pattern. It’s an oversize straight silhouette midthigh hooded insulated lined coat. Center front closure comes with a zipper, inner and outer windproof plackets. Stitched on outer placket comes with a hidden button panel with 5 buttonholes and 5 buttons. Top part of front comes with a set-in welt pocket with sewn-in ends. Bottom part of front comes with a cargo patch pocket with a flap, there is a snap button closure on the inner side of a flap. Back has center seam and yoke. There is a drawstring casing on the front and back details along the waistline, there is a spaghetti strap inside to adjust a size of the garment’s waistline. Strap’s ends are inserted into grommets and forwarded to the right side of the garment. Set-in full length sleeve comes with underarm and elbow seams and inner knitted cuff. Roundish neckline is finished with a hood. Standard fit hood has a center part and wide facing along the facial edge. There is a strap at the center part of a hood to adjust its size.

Eases added to a pattern, cm:  

*Constructive ease (Ec)*: Bust-line: 32,5 см, Hips-line: 30,0 cм, Shoulders: 22,5 см

*Ease of package (Ep)*: 5,0 см (may vary depending on a type of insulation material). We used 200 g/m2 density insulation material for our garment.

*Ease of freedom (Ef): (Pay attention to this increase in order to estimate the garment volume!): Bust-line: 27,5 см; Hips-line: 25,0 cм, Shoulders:  17,5 см.

*Ec = Ep + Ef

Finished back length along the center back seam, 38 size: 76,3-81,5; 40,42 size: 76,4-86,8; 44,46 size: 76,5-86,9; 48,50 size: 76,6-87,0; 52,54 size: 76,7-87,1; 56 size: 76,8-87,2.

Fabric suggestion: We recommend to use for this model raincoat fabrics, raincoat fabrics with membrane, waterproof raincoat fabrics. Suitable lining fabrics for membrane fabrics can consist of synthetic fibers, for raincoat fabrics use fabrics that consist of synthetic, blended or natural fibers. As a hood lining you can use a low pile faux fur, fabric has to be not stretchy or can be stretchy little bit. As an insulation material use a new-generation synthetic thermal indulation material with a protection layer on both sides. For example it can be ISOSOFT 34 200 g/m2 and 100 g/m2 (for the hood).

Amount of main fabrics, wide 140 cm: 38 size: 2,80-2,90 м; 40 size: 2,85-3,05 м; 42 size: 2,85-3,05 м; 44 size: 3,00-3,20 м; 46 size: 3,05-3,25 м; 48 size: 3,10-3,30 м; 50 size: 3,15-3,40 м; 52 size: 3,20-3,45 м; 54 size: 3,25-3,50 м; 56 size: 3,30-3,55 м.

Amount of lining fabrics, wide 140 cm: 38 size: 1,45-1,55 м; 40 size: 1,50-1,70 м; 42 size: 1,55-1,70 м; 44 size: 1,55-1,75 м; 46 size: 1,60-1,75 м; 48 size: 1,60-1,80 м; 50 size: 1,65-1,80 м; 52 size: 1,70-1,85 м; 54 size: 1,75-1,90 м; 56 size: 1,75-1,95 м. 

Amount of faux fur, 140 cm wide: 38-56 size: 0,55 м.

Insulation material of 200 g/m2 wide 140 cm: 38 size: 1,60-1,70 м; 40 size: 1,75-1,95 м; 42 size: 1,80-2,00 м; 44 size: 1,80-2,05 м; 46 size: 1,85-2,05 м; 48 size: 1,85-2,10 м; 50 size: 1,90-2,15 м; 52 size: 1,95-2,15 м; 54 size: 1,95-2,20; 56 size: 2,00-2,25 м.

Insulation material of 100 g/m2 wide 140 cm: 38-44 size: 0,60 м; 46 size: 0,60-0,65 м; 48-56 size: 0,65 м.

Ribbing fabric wide 110 cm: 38-56 size: 0,25 м.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Garment accessories:

Pattern is given with seam allowances.

Degree of difficulty - "Advanced”

The photos shows a coat sewed at the GRASSER  for pattern №881

Model is wearing a size 42, height 170-176. Models parameters: Brittany: Bust-line: 83см, Waist-line: 64,5 см, Hips: 83 см, height 174 см; Yana: Bust-line: 84 см, Waist-line: 60 см, Hips: 90 см, height 175 см.

The images also shows: sweater on pattern №816, trousers on pattern №877, mittens on pattern №809

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
  
• An iron with or without steam;
• Regular presser foot; Hinged cording foot; Walking or Teflon machine foot;
• Wooden iron;
• Ironing desk or console table;
• Hand needle for basting;
• Sewing machine needles № 80 MICROTEX (extra sharp for raincoat fabrics);
• Machine needles №80-90 for the lining;
• Paper scissors; Scissors for textile cutting;
• Eyelet press for installing eyelets and press studs, depending on the diameter.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.