Jacket, pattern №1154
Advanced level
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
size 38, height 152-158
-
size 38, height 158-164
-
size 38, height 164-170
-
size 40, height 152-158
-
size 40, height 158-164
-
size 40, height 164-170
-
size 40, height 170-176
-
size 40, height 176-182
-
size 42, height 152-158
-
size 42, height 158-164
-
size 42, height 164-170
-
size 42, height 170-176
-
size 42, height 176-182
-
size 44, height 152-158
-
size 44, height 158-164
-
size 44, height 164-170
-
size 44, height 170-176
-
size 44, height 176-182
-
size 46, height 152-158
-
size 46, height 158-164
-
size 46, height 164-170
-
size 46, height 170-176
-
size 46, height 176-182
-
size 48, height 152-158
-
size 48, height 158-164
-
size 48, height 164-170
-
size 48, height 170-176
-
size 48, height 176-182
-
size 50, height 152-158
-
size 50, height 158-164
-
size 50, height 164-170
-
size 50, height 170-176
-
size 50, height 176-182
-
size 52, height 152-158
-
size 52, height 158-164
-
size 52, height 164-170
-
size 52, height 170-176
-
size 52, height 176-182
-
size 54, height 152-158
-
size 54, height 158-164
-
size 54, height 164-170
-
size 54, height 170-176
-
size 54, height 176-182
-
size 56, height 152-158
-
size 56, height 158-164
-
size 56, height 164-170
-
size 56, height 170-176
-
size 56, height 176-182
-
-
Size:
- 38
- 40
- 42
- 44
- 46
- 48
- 50
- 52
- 54
- 56
Height:
- 152-158
- 158-164
- 164-170
- 170-176
- 176-182
$10
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
Loose-fit, straight blazer below hip line, lined. The closure is on the front, displaced with two rows of buttons and buttonholes. The side seams are transferred into a seamless side piece. The front has two pairs of darts and two pockets. The first pair of darts from the neckline is drafted under the collar. The second pair of darts was drafted by joining the bust darts with waist darts and it ends by the pocket opening. Jetted welt pocket with a flap. The back has a centre seam. A vent is made inside the centre seam. The shoulder edge is designed with an ease. Depending on the selected size you can press the ease or stitch shoulder darts. The sleeves are set-in, two-seam with an open vent inside the elbow seam. Shawl collar.
Model is wearing a size 42. Model parameters: Bust-line: 81 cm, Waist-line: 61 cm, Hips: 92 cm, Height: 174 cm. -
Bust-line: 30,4 cm.
Hips-line: 21,6 cm.
Shoulders: 13,0 cm. -
Size
38
40
42
44
46
48
50
52
54
56
Finished back length along the center back seam.
cm69,6-73,7
69,7-78,0
69,8-78,1
69,9-78,2
70,0-78,3
70,1-78,4
70,2-78,5
70,3-78,6
70,4-78,7
70,5-78,8
Finished sleeve length, cm
59,9-63,7
60,0-67,6
60,1-67,7
60,2-67,8
60,3-67,9
60,4-68,0
60,5-68,1
60,6-68,2
60,7-68,3
60,8-68,4
-
Main fabric. For this garment we recommend suiting fabrics, which are easy to press (some pieces are designed with easing of their edges). The fabric can be natural, synthetic or blended.
Lining material. As a lining use the fabrics with density and plasticity suitable for the shell fabric, made out of natural, synthetic or blended fibre.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material and fusible facing straightener. For example, you may use 33-39 g/m2 density 150 cm, width woven interfacing.
For better sewing quality, we recommend strengthening some details with a feasible facing straightener of 97 g/m2 and with the width of 90 cm. The density of the interfacing material depends on the main fabric density. -
Amount of Fabrics (in metres):
Size
38
40
42
44
46
48
50
52
54
56
Main fabric, wide 140 cm
1,80-1,85
1,85-1,95
1,85-2,05
1,90-2,10
1,95-2,15
2,00-2,15
2,05-2,30
2,10-2,35
2,10-2,35
2,15-2,40
Lining fabric, wide 140 cm
1,20-1,25
1,30-1,40
1,30-1,45
1,35-1,45
1,35-1,50
1,35-1,50
1,40-1,50
1,40-1,55
1,40-1,55
1,40-1,55
Interfacing (density 33-39 g/m2; width 150 cm)
1,55-1,65
1,55-1,75
1,55-1,75
1,60-1,75
1,60-1,75
1,60-1,80
1,65-1,80
1,70-1,85
1,70-1,85
Fusible facing straightener (density 97 gr/m2; width 90 cm)
0,35
Bias fusible tape with reinforcement stitches
2,40
2,40-2,55
2,45-2,60
2,50-2,65
2,55-2,70
2,60-2,75
2,65-2,80
2,70-2,85
2,75-2,90
2,80-2,95
Fusible on grain tape
1,60-1,65
1,60-1,75
1,60-1,75
1,60-1,75
1,60-1,75
1,60-1,75
1,60-1,75
1,60-1,75
1,60-1,75
1,60-1,75
Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories:
01. Button 22-25 mm in diameter - 4 pcs, for the front closure.
02. Button 15-17 mm in diameter - 8 pcs (for the vents of the sleeves).
03. Shoulder pads 10 mm thick - 1 pair.
04. Sleeve heads - 1 pair. -
1. Multipurpose sewing machine;
2. An iron with or without steam;
3. Regular presser foot;
4. Wooden iron;
5. Ironing desk or console table;
6. Hand needle for basting;
7. Machine needles № 80-90 for the main fabric;
8. Machine needles № 70 for the lining;
9. Paper scissors;
10. Scissors for textile cutting. -
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!
A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter.
A test square for checking the plotter scale is located on the pattern sheet.
All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.
