Trousers, pattern №969

Trousers pattern. Women’s straight voluminous trousers of full length. There are two pairs of deep single-sided pleats on the front parts. The trousers have side seam pockets with a cut-off side piece and a slanted pocket entry line. There are two pairs of darts on the back parts. The cut-off waistband has five beltloops. The garment has a zip fastening in the seam between the front parts and a hook-and-loop fastener on the waistband.

The waistline is lowered by 4 cm.

Eases added to a pattern, cm:

Waist-line: 5,0. Hips-line: 6,0 (in the sizes 38-50), 7,0 (in the sizes 52-62).

Garment Length Measurements, cm

Finished length along the side seam (with waistband), cm: size 38: 99,2-116,6, size 40: 99,4-116,8, size 42: 99,6-117,0, size 44: 99,8-117,2, size 46: 100,0-117,4, size 48: 100,2-117,6, size 50: 100,4-117,8, size 52: 100,6-118,0, size 54: 100,8-118,2, size 56: 101,0-118,4, size 58: 101,2-118,6, size 60: 101,4-118,8, size 62: 101,6-119,0.

Finished garment hem width, cm: size 38: 82,0, size 40: 83,5, size 42: 85,0, size 44: 86,5, size 46: 88,0, size 48: 89,5, size 50: 91,0, size 52: 92,5, size 54: 94,0, size 56: 95,5, size 58: 97,0, size 60: 98,5, size 62: 100,0.

Fabric suggestion: 

Main fabric. We recommend using suiting fabrics for this garment, light and medium-weight fabrics with natural, synthetic or mixed fibres, that are easy to press.

Lining fabric. To line the garment, use fabrics that match the fluidity characteristics and the density of the natural, synthetic or blended fibre upper fabric.

Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 34 g/m2 density 150 cm, width woven interfacing.

The density of the interfacing material depends on the main fabric density.

Amount of Fabrics (in metres):

Main fabric, wide 140 cm: size 38: 2,05-2,25, size 40-42: 2,05-2,40, sizes 44-48: 2,10-2,40, sizes 50-54: 2,10-2,45, sizes 56-58: 2,15-2,45, size 60: 2,25-2,45, size 62: 2,25-2,50.

Lining fabric, wide 140 cm: sizes 38-62: 0,35.

Interfacing (density 34 g/m2; width 150 cm): sizes 38-62: 0,25.

Fusible reinforced bias tape: sizes 38-62: 0,8.

Fusible on grain tape: size 38: 0,9, size 40-42: 0,95, size 44-46: 1,0, size 48: 1,05, size 50: 1,1, size 52: 1,15, size 54: 1,2, size 56: 1,25, size 58: 1,3, size 60: 1,35, size 62: 1,4.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

 Garment accessories: 

Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - "Intermediate”.  

The photos shows a trousers sewed at the GRASSER  for pattern №969.

Model is wearing a size 44, height 170-176. Model parameters: Bust-line: 92 cm, waist-line: 64 cm, Hips: 97 cm, Height: 179 cm.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.