Cap, free pattern №1095
Sizes:
-
Head 48-50 cm
-
Head 51-53 cm
-
Head 54-56 cm
-
Head 57-59 cm
-
Head 60-62 cm
-
-
Height:
- Head 48-50 cm
- Head 51-53 cm
- Head 54-56 cm
- Head 57-59 cm
- Head 60-62 cm
Free pattern in PDF format. To download a free pattern you must log in or register
Info
Comments
Questions
Cap pattern. A headdress - a cap of the medium volume, lined and insulated. It consists of 4 panels and the facing of the bottom. The facing of the bottom turns away to the garment outer part.
Garment Length Measurements, cm:
Size |
48-50 |
51-53 |
54-56 |
57-59 |
60-62 |
Height of the finished garment (in the center of the panel, |
17,0 |
18,5 |
20,0 |
21,0 |
22,0 |
1/2 of the garment width along the bottom |
28,5 |
30,0 |
31,5 |
33,0 |
34,5 |
Fabric suggestion:
Main fabric. We recommend using soft, medium density and thin raincoat and jacket fabrics for this model; raincoat fabrics with a membrane coating.
Finishing material. The lining detail of the bottom can be made of artificial fur with a short pile or knitted materials with a pile, with little or no stretching.
Lining material. As a lining, we recommend using knitted fabrics of small and medium density, soft, with low electrification, made of natural, synthetic or mixed fibers, for example: a fleece, a knitted knitwear, or a rib knitted fabric.
Insulation. To insulate the garment, we recommend using synthetic insulation materials of a new generation with a protective layer on both sides, for example, ISOSOFT 34 100 g/m2. Ready-made quilted raincoat fabric can be used for sewing.
Amount of Fabrics (in metres):
Option 1. The top details (the panel and the facing of the bottom) are made of the same fabric
Size |
48-50 |
51-53 |
54-56 |
57-59 |
60-62 |
Main fabric, wide 140 cm (for panel and facing of a bottom) |
0,25 |
0,25 |
0,30 |
0,35 |
0,40 |
Lining fabric, wide 140 or 180 cm |
0,25 |
0,25 |
0,25 |
0,30 |
0,30 |
Insulation material (100 g/m2; width 140 cm) |
0,35 |
0,40 |
0,45 |
0,50 |
0,55 |
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Option 2. The top details (the panel and the facing of the bottom) are made of different fabrics
Size |
48-50 |
51-53 |
54-56 |
57-59 |
60-62 |
Main fabric, wide 140 cm (for panel) |
0,25 |
0,25 |
0,30 |
0,30 |
0,30 |
Finishing fabric, wide 140 cm (for facing of a bottom) |
0,25 |
0,25 |
0,25 |
0,25 |
0,25 |
Lining fabric, wide 140 or 180 cm |
0,25 |
0,25 |
0,25 |
0,30 |
0,30 |
Insulation material (100 g/m2; width 140 cm) |
0,35 |
0,40 |
0,45 |
0,50 |
0,55 |
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Pattern is given with seam allowances.
Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.
Degree of difficulty - "Beginner”.
The photos shows a cap sewed at the GRASSER for pattern №1095.
Model is wearing a size 54-56. Model parameters: The circumference of head: 55 cm.The photo also shows: scarf on pattern №1096, jacket on pattern №1053, trousers on pattern №1051, turtleneck sweater on pattern №913, dress on pattern №726, vest on pattern №954, jacket pattern №1065, cardigan on pattern №1052.
For sewing you will need the following equipment:
2. An iron with or without steam;
3. Regular presser foot;
4. Hinged cording foot;
5. Wooden iron;
6. Ironing desk or console table;
7. Hand needle for basting;
8. Machine needles №70-80 for the main fabric;
9. Machine needles Stretch or Super Stretch №70 for the lining;
10. Paper scissors;
11. Scissors for textile cutting.
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!
A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter.
A test square for checking the plotter scale is located on the pattern sheet.
All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.