Dress in four versions, pattern №911
4 dresses from the same pattern: turtleneck dress, sleeveless dress, sleeveless dress with a stand collar, dress with cut neckline and long sleeves.
Difficulty: 2/5
Instructions with photo
Plotter 600 + А4/Letter
Sizes:
-
size 38, height 152-158
-
size 38, height 158-164
-
size 38, height 164-170
-
size 40, height 152-158
-
size 40, height 158-164
-
size 40, height 164-170
-
size 40, height 170-176
-
size 40, height 176-182
-
size 42, height 152-158
-
size 42, height 158-164
-
size 42, height 164-170
-
size 42, height 170-176
-
size 42, height 176-182
-
size 44, height 152-158
-
size 44, height 158-164
-
size 44, height 164-170
-
size 44, height 170-176
-
size 44, height 176-182
-
size 46, height 152-158
-
size 46, height 158-164
-
size 46, height 164-170
-
size 46, height 170-176
-
size 46, height 176-182
-
size 48, height 152-158
-
size 48, height 158-164
-
size 48, height 164-170
-
size 48, height 170-176
-
size 48, height 176-182
-
size 50, height 152-158
-
size 50, height 158-164
-
size 50, height 164-170
-
size 50, height 170-176
-
size 50, height 176-182
-
size 52, height 152-158
-
size 52, height 158-164
-
size 52, height 164-170
-
size 52, height 170-176
-
size 52, height 176-182
-
-
Size:
- 38
- 40
- 42
- 44
- 46
- 48
- 50
- 52
Height:
- 152-158
- 158-164
- 164-170
- 170-176
- 176-182
$10
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
Dress pattern in four versions:
Option 1. Dress with turtleneck. The dress is fitted, hits above the knee. The back is cut along the waistline. There is a centre seam in the back upper part. The sleeve is set-in, with one seam. Stand collar.
Option 2. Sleeveless dress. The sleeveless dress has a fitted silhouette, hits above the knee. The back is cut along the waistline. There is a centre seam in the back upper part. The armhole and the necklines are finished with a facing.
Option 3. Sleeveless dress with a stand collar. The dress is fitted, hits above the knee, sleeveless. The back is cut along the waistline. There is a centre seam in the back upper part. Stand collar. The armhole is finished with bias tape.
Option 4. Dress with cut neckline and long sleeves. The dress is fitted, hits above the knee. The back is cut along the waistline. There is a centre seam in the back upper part. The sleeve is set-in, with one seam. The neckline is finished with bias tape. -
Bust-line: (-1) cm,
Waist: 8,0 cm; Hips-line: 3 cm;
Hips-line: (-1) cm;
Shoulders: 1,5 cm. -
Finished length along the center back seam, cm: 38 size: 116,4-123,6; 40-56 size: 116,4-130,8.
-
Fabric suggestion: for this garment we recommend soft, flowing mid-weight knitted fabrics with stretch factor 0.80-0.85. The composition of the fibre may be natural (wool, cotton, silk), artificial (viscose, modal), synthetic or blended. Please, pay attention, the garment is fitted, wearing ease is negative in some areas. Using a knit fabric with sufficient elasticity is highly recommended. If your fabric’s stretch factor is less than recommended, please, select the pattern which is 1-2 sizes larger than your regular size.
-
Amount of main fabric, wide 140 cm: 38 size: 1,35-1,40 м; 40-46 size: 1,35-1,50 m; 48 size: 1,70-1,75 m; 50,52 size: 1,75-1,95 m; 52 size: 1,25-1,40 m; 54 size: 1,75-2,00 m; 56 size: 1,75-2,05 m.
Amount of main fabric, wide 180 cm: 38 size: 1,35-1,40 m; 40-50 size: 1,35-1,50 m; 52.54 size: 1,40-1,50 m; 56 size: 1,40-1,55 m.
Amount of finishing fabric, wide 140 cm: 38-44 size: 0,45 m; 46-52 size: 0,45-0,50 m; 54,56 size: 0,50 m.
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once. -
For sewing you will need the following equipment:
- Multipurpose sewing machine;
- 4 thread overlock machine;
- An iron with or without steam;
- Regular presser foot;
- Wooden iron;
- Ironing desk or console table;
- Hand needle for basting;
- Machine needles Stretch №70-80;
- Paper scissors;
- Scissors for textile cutting.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!
A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter.
A test square for checking the plotter scale is located on the pattern sheet.
