Coat, pattern №818

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Coat pattern.  It’s a slim fit lined mid-calf length coat. Coat fits tight 7,0-9,0 cm higher the natural waistline placement, actual placement of that area depends on a height and a size. There is no side seam, there is a side part.Front features a waist dart and a set-in welt pocket. A bust dart was transferred into a waist dart, dart ends at a pocket opening. Back features a shoulder dart and a center seam, there is a vent in a center seam. Set-in sleeves are long and two-pieced. English collar comes with a collar stand.

Eases added to a pattern: 

Bust-line – 8,4 cm.

Hips-line – 10,2 cm (in all sizes of height 152-158);

                – 10,2 cm (in all sizes of height 158-164);

                – 10,4 cm (in all sizes of height 164-170);

                – 10,6 cm (in all sizes of height 170-176);

                – 10,8 cm (in all sizes of height 176-182).

Shoulders – 8,7 cm.

Finished back length along the center back seam, сm: 

Fabric suggestion: 

Main fabric. We recommend to use for this model coat fabrics with small or average thickness, light, soft, pliable, with or without a nap, well shaped by steaming. It can be fabric made of natural, synthetic or blended fibers.

Lining fabric. As lining you can use fabrics with same properties that main fabric features (pliability and density). It can be fabrics from natural, synthetic or blended fabrics.

Interfacing materials. To rise you sewing quality we recommend you to use woven interfacings and polyethylene coated interfacing. Use 39 g/m2 150 cm width woven interfacing. The facing straightener fusible of the white color and with the density of 64 g/m2, the width is 90 cm. Density types of both interfacings depends on the density of the main fabric.

Amount of Fabrics (in metres):

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Garment accessories:

1. Buttons with the diameter 25 mm – 2 pcs.

2. Inside button with the diameter 20-22 mm – 1 pcs.

3. Reinforced button with the diameter 12-15 mm – 2 pcs.

4. 1 pair of shoulder pads wide 15 mm.

5. Sleeve head – 2 pcs.

Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - “Advanced”

The photos shows a coat sewed at the GRASSER  for pattern № №818

Model is wearing a coat size 42, height 176-182.  Model parameters: Bust-line: 84, waist-line: 61, Hips: 88,5, height 176.

Model Uliana is wearing a size 44. Model parameters: Bust-line: 92 cm, Waist-line: 64 cm, Hips: 97 cm, Height: 179 cm.

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

For sewing you will need the following equipment:

• Multipurpose sewing machine;
• An iron with or without steam;
• Regular presser foot;
• Hinged cording foot;
• Wooden iron;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles №90-100 for the main fabric;
• Machine needles №70 for the lining;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.