Dog vest, pattern №987

Sizes:

size L, length 1
size L, length 2
size L, length 3
size M, length 1
size M, length 2
size M, length 3
size S, length 1
size S, length 2
size S, length 3
size XL, length 1
size XL, length 2
size XL, length 3
size XS, length 1
size XS, length 2
size XS, length 3
-

Size:

Height:

length 1
length 2
length 3

After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".

Info

Comments

Questions

Dog vest pattern. Padded insulated vest with lining for small and big dogs and cats. Back comes with a center seam. There is a hole in the seam to fix a dog-lead to a harness, that hole is closed with a flap. Neckline is finished with a collar stand. There is a drawstring casing in the neckline to adjust the garment’s size. Hem edge of the garment is finished with a binding. Strop features a fastex closure to adjust the garment’s size. There is an elastic strap, fixed to the back’s hem edge, to fix the garment to a dog’s hind legs.

Garment Length Measurements, cm

Size	XS			S			M			L			XL
Length	1	2	3	1	2	3	1	2	3	1	2	3	1	2	3
Finished back length along the center back	19,2	21,2	23,2	28,9	32,0	34,9	38,7	42,7	46,7	48,5	53,5	58,5	58,2	64,2	70,2

Fabric suggestion:

Main fabric. We recommend to use for this garment soft, average density and thin rain wear fabrics, coat fabrics; membrane-coated rain wear fabrics; rain wear and coat waterproof fabrics. You also can use ready padded fabric.

Lining fabric. As lining for membrane fabrics use fabric from synthetic fibers, for rain wear and coat fabrics use fabric from synthetic, blended or natural fibers.

Use lining material with same properties (pliability, density) that main fabric has, it can be from natural, synthetic or blended fibers.

Insulation. As insulation material use synthetic ones with protection layer on its each side. For example, it can be 100-150 g/m2 ISOSOFT 34.

Interfacing materials. For better tailoring we recommend using a side booster with a non-adhesive density of 80 g/m2, a width of 150 cm. The density of the interfacing material depends on the main fabric density.

Amount of Fabrics (in metres):

Size	XS	S	M	L	XL
Main fabric, wide 140 cm	0,35- 0,40	0,45- 0,55	0,70- 0,85	1,00- 1,20	1,30- 1,45
Insulation material, width 140 cm	0,35- 0,40	0,45- 0,50	0,55- 0,65	0,65- 0,75	0,85- 0,95
Non-fusible facing straightener of 80 g/m2 and with the width of 150 cm	0,10	0,10	0,10	0,10	0,10
2.0 cm width strop	0,80	0,90	-	-	-
2.8 cm width strop	-	-	1,00	1,20	1,20
2.0-5.0 mm diameter bride	0,40	0,50	0,60	0,70	0,80
1.0 cm width elastic tape	0,50	0,70	0,80	0,90	1,10

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Garment accessories
1. Grommets – 2 pcs.
2. 2.0-5.0 mm diameter (depends on the garment’s size) bride.
3. 1.0 cm width elastic tape.
4. 2.0 cm width strop length for sizes XS-S,
    2.8 cm width length for sizes M-XL.
5. Stopper for 2 holes – 1 piece.
6. 2.0 cm width quare buckle for sizes XS-S – 2 pcs.
      3.0 cm width for sizes M-XL – 2 pcs.
7. 2.0 cm width fastex for sizes XS-S – 1 piece.
      3.0 cm. width for sizes M-XL – 1 piece.

Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - "Beginner”.

The photos shows a dog vest sewed at the GRASSER for pattern №987.

For sewing you will need the following equipment:

1. Multipurpose sewing machine;
2. An iron with or without steam;
3. Regular presser foot;
4. Hinged cording foot;
5. Wooden iron;
6. Ironing desk or console table;
7. Hand needle for basting;
8. Machine needles №70-80;
9. Paper scissors;
10. Scissors for textile cutting;
11. Snaps pressing machine to install accessories grommets, depending on the diameter.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter.

A test square for checking the plotter scale is located on the pattern sheet.

All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.