Pet bolster, pattern №990
Sizes:
-
One size
-
-
Size:
- One
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
Pet bolster pattern. Rectangular pet bed with bolstered sides and a cushion pad. Available in 3 sizes, see table below for size options.
After purchase you’ll get a file with measurements of all the garment’s options.
There will be no pattern pieces, we offer you to draw the garment’s details on a fabric in accordance to the measurements given in the file.
Garment Length Measurements, cm
Size |
Option 1 |
Option 2 |
Option 3 |
Garment length |
48,0 |
60,0 |
76,0 |
Garment width |
35,0 |
45,0 |
63,0 |
Height |
15,0 |
20,0 |
20,0 |
Fabric suggestion:
Main fabric. For sewing this garment, we recommend using fabrics that are highly resistant to wear and are easy to clean.
Give preference blended fabrics. Ease of cleaning and the absence of static electricity are important qualities in the choice of fabric.
For short-haired breeds, we recommend using a fluffy fabric, for instance, plush or velour, fleece, microfibre, flock made of natural or blended fibres.
For dogs with thick coats, we recommend sturdy cotton, linen, upholstery fabrics and denim.
Synthetic fabrics should avoided. It can accumulate static electricity and may cause allergies.
Lining fabric. We recommend using of thick fabrics for lining that prevent the cushion filling material from shifting. These can be natural, blended or synthetic fabrics.
Cushion filling. We recommend using different excess insulation, fillings and scraps as filling material. Fillings can be rolled, woven or in the form of balls. For example, sintepon, isosoft, thinsulate and others.
In our garment we used 400g/m2 volumetric Holofiber for filling the borders, and swan feathers and a synthetic filler for filling the cushion.
Amount of Fabrics (in metres):
Size |
Option 1 |
Option 2 |
Option 3 |
Main fabric, wide 140 cm |
1,05 |
1,60 |
2,40 |
Lining fabric, wide 140 cm |
0,90 |
1,55 |
2,05 |
Invisible zipper |
0,25 |
0,35 |
0,50 |
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
1. Plastic invisible zipper, type 3 – 5 pieces.
(The zipper length for each size is given in the table).
Pattern is given with seam allowances.
Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.
Degree of difficulty - "Beginner”.
The photos shows a pet bolster sewed at the GRASSER for pattern №990.
For sewing you will need the following equipment:
1. Multipurpose sewing machine;
2. 4 thread overlock machine;
3. An iron with or without steam;
4. Regular presser foot;
5. Hinged cording foot;
6. Wooden iron;
7. Ironing desk or console table;
8. Hand needle for basting;
9. Machine needles Stretch №70-80;
10. Paper scissors;
11. Scissors for textile cutting;
12. Snaps pressing machine to install accessories snap buttons, depending on the diameter.
All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.