All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.
Trench coat pattern. Regular fit lined trench coat with slightly flared hem. Mid-calf length. A double-breasted front has two rows of buttonholes and buttons. The front features welted button-close pockets with topstitched ends. The left front is defined with a storm flap. The storm flap is secured to the front with a button and a buttonhole. The back is designed with a centre seam. A vent is sewn in the centre seam. The back is completed with a storm flap. The raglan sleeves have three seams: an upper seam, front seam and elbow seam. Detachable curved epaulettes are placed along the shoulder seam on the top of the sleeve. The epaulette is inserted through a loop and fastened with a button. A detachable strap with a buckle is placed in the lower part of the sleeve to adjust the sleeve volume. The strap is inserted through three loops and is placed 5 cm above the sleeve hem. The roll collar has an attached collar stand. The collar stand is fastened with a hook. The collar is completed with a throat latch. The throat latch is fastened with a buckle (on the right part of the collar) or with two buttonholes and two buttons (on the left part of the collar). The trench coat is designed with a detachable belt with a buckle. The belt is inserted through two belt loops sewn on the side seams. A keeper loop is affixed to the inner side of the belt near the buckle. Three D-rings are attached with straps to the lower edge of the belt.
Eases added to a pattern, cm:
Bust-line – 26,4 cm + model’s widening;
Hips-line – 18,3 cm + model’s widening;
Shoulders – 26,0 cm.
Finished back length along the center back seam
Finished sleeve length from neckline
Main fabric. For this garment we recommend using twill fabrics with or without various coatings with or without waterproof surface of different weights and textures. The fabric can be natural, synthetic or blended.
Lining material. As a lining use the fabrics with density and plasticity suitable for the shell fabric, made out of natural, synthetic or blended fibre.
Interfacing materials. For a higher quality result we recommend using iron-on woven interfacing, iron-on or sew-on non-woven interfacing. Iron-on woven interfacing materials 18 gsm and 55 gsm 150 cm wide are required for the garment’s pieces interfacing. Select the right weight of the interfacing depending on your main fabric’s weight.
The following interfacing is recommended:
1. Fusible interfacing fabric 103 gsm.
2. Non-woven iron-on interfacing 30 gsm.
3. Non-woven sew-on interfacing 60 gsm.
Amount of Fabrics (in metres):
Main fabric, wide 140 cm
Lining fabric, wide 140 cm
Interfacing (density 55 g/m2; width 150 cm)
Interfacing (density 18 g/m2; width 150 cm)
Fusible interfacing fabric 103 g/m2, wide 90 cm
Non-woven iron-on interfacing 30 g/m2, wide 90 cm
Non-woven sew-on interfacing 60 g/m2, wide 105 cm
Fusible on grain tape
LINING USED IN CLASSIC TRENCH COATS, FOR EXAMPLE, IN BURBERRY TRENCH COATS:
— Cotton lining fabric, medium weight and medium thickness, is used for the front and back.
— Silk twill fabrics, which may contain viscose fibre, are used for the sleeve pieces.
— Pocketing fabric is used for pocket lining. It may be natural fabrics or blends.
Lining fabric, wide 140 cm (for the front and back)
Lining fabric, wide 140 cm (for the sleeve pieces)
Lining fabric, wide 140 cm (for pocket lining)
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
1. Button 27-28 mm in diameter - 12 pcs. 2. Button 22 mm in diameter - 6 pcs. 3. Button 17-18 mm in diameter - 5 pcs. 4. Button 14-15 mm in diameter - 8 pcs. 5. Hook for the collar stand, metal, 25 mm wide - 1 pc. 6. Double-cap rivets, metal, 7 mm in diameter - 4 pcs. 7. Leather-covered metal buckle with inner width 50 mm - 1 pc (for the belt). 8. Leather-covered metal buckle with inner width 30 mm - 1 pc (for the sleeve strap). 9. Metal buckle with inner width 25 mm - 1 pc (for the throat latch). 10. Chain hanging loop, metal - 1 pc. 11. D-ring with the inner width 20 mm, metal - 3 pcs (for the D-ring holders).
Pattern is given with seam allowances.
Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.
Degree of difficulty - "Advanced”.
The photos shows a raincoat sewed at the GRASSER for pattern №1003.
Model is wearing a size 42. Model parameters: Bust-line: 84 cm, Waist-line: 61,5 cm, Hips: 94 cm, Height: 177 cm.
1. Multipurpose sewing machine; 2. An iron with or without steam; 3. Regular presser foot; 4. Hinged cording foot; 5. Wooden iron; 6. Ironing desk or console table; 7. Hand needle for basting; 8. Machine needles №80-90 for the main fabric; 9. Machine needles №70-80 for the lining; 10. Paper scissors; 11. Scissors for textile cutting; 12. Snaps pressing machine to install accessories and polyteny dies depending on diameter.
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!
A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter.
A test square for checking the plotter scale is located on the pattern sheet.
Sew with this goods
Trousers, pattern №197
Trousers with 2 pocket options, pattern №834
Trousers, pattern №885
Turtleneck sweater, pattern №893
Dress, pattern №771
Insulated trousers, pattern №883
Dress, pattern №934
Kimono waistcoat, pattern №435
Jacket, pattern №1017
Sleeveless shirt, pattern №991
Skirt, pattern №943
Skirt, pattern №1045
Women's jersey jacket, pattern №966
All documents, multimedia and texts posted on en-grasser.com are works of authorship and are the property of Grasser Group Limited. All the information and products are provided to buyers for personal use. Resale of patterns and master classes is prohibited and prosecuted by law. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law. When copying text information, an active link to en-grasser.com is required. Every copy from the site en-grasser.com is tracked.