Insulated coat, pattern №882

Use the Test Square to adjust the print scale! A test square for checking the A4/Letter scale is located on the first sheet of the A4/Letter pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Insulated coat pattern. A puffer coat of relaxed fit, straight silhouette, length below the hip line, with insulation and lining, with a hood. The central zip fastening is decorated with internal and external wind-proof plackets. The outer placket is sewn onto, with 5 snap buttons. There are patch pockets of geometric shape on the front. The sleeve is sewn in, single-seam, shirt type. The sleeve ends with a cuff. The cuff is assembled on an elastic band. To adjust the volume, there is a sleeve strap with a 1-snap button on it. The neckline is round with a hood. The hood is small, with a one-piece stand and a central part. The fit of the product along the waistline is regulated by a detachable belt with a buckle. There are two belt loops located at the side seams.

Eases added to a pattern, cm:  

*Constructive ease (Ec)*: Bust-line: 36 см, Hips-line: 28 cм, Shoulders: 33 см

*Ease of package (Ep)*: 7,0 см (may vary depending on a type of insulation material). We used 200 g/m2 density insulation material for our garment.

*Ease of freedom (Ef): (Pay attention to this increase in order to estimate the garment volume!): Bust-line: 29 см; Hips-line: 21 cм, Shoulders: 26 см.

*Ec = Ep + Ef

Finished back length along the center back seam, 38 size: 70,5-75,7; 40,42 size: 70,6-81,0; 44,46 size: 70,7-81,1; 48,50 size: 70,8-81,2; 52,54 size: 70,9-81,3; 56 size: 71,0-81,4.

Fabric suggestion: for this model we recommend using soft, medium density and thin water-resistant nylon or polyester membrane fabric, fabrics with impregnation. For sewing, you can use ready-made quilted raincoat fabric. As for lining for membrane fabrics, we recommend using a lining made of synthetic fibers, for raincoat fabrics use synthetic, blended or natural fabrics as lining. We recommend using synthetic insulating material: use THINDOWN insulation for the 1st layer (density 150 g/m2); for the 2nd layer use insulating material with two sides protection, like ISOSOFT 34 200 g/m2.

Amount of main fabrics, wide 140 cm: 38 size: 2,45-2,55 м; 40 size: 2,50-2,75 м; 42 size: 2,55-2,80 м; 44 size: 2,65-2,90 м; 46 size: 2,70-2,95 м; 48 size: 2,75-3,00 м; 50 size: 2,80-3,05 м; 52 size: 2,85-3,15 м; 54 size: 2,90-3,20 м; 56 size: 2,95-3,25 м.

Amount of lining fabrics, wide 140 cm: 38 size: 1,30-1,40 м; 40 size: 1,30-1,50 м; 42 size: 1,35-1,50 м; 44 size: 1,35-1,55 м; 46 size: 1,35-1,55 м; 48 size: 1,40-1,60 м; 50 size: 1,45-1,70 м; 52 size: 1,50-1,70 м; 54 size: 1,55-1,80 м; 56 size: 1,80-2,05 м. 

Insulation material THINDOWN of 150 g/m2 wide 140 cm: 38 size: 1,65-1,75 м; 40 size: 1,65-1,90 м; 42 size: 1,70-1,90 м; 44 size: 1,80-2,05 м; 46 size: 1,90-2,30 м; 48 size: 2,05-2,30 м; 50-56 size: 2,10-2,35 м.

Insulation material of 100 g/m2 wide 140 cm: 38 size: 1,65-1,75 м; 40,42 size: 1,70-1,90 м; 44 size: 1,75-2,00 м; 46 size: 1,85-2,15 м; 48-52 size: 1,90-2,15 м; 54 size: 2,00-2,20 м; 56 size: 2,05-2,25 м.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Pattern is given with seam allowances.

Degree of difficulty - "Advanced”

The photos shows a coat sewed at the GRASSER  for pattern №882

Model is wearing a size 42, height 170-176. Models parameters: Brittany: Bust-line: 83см, Waist-line: 64,5 см, Hips: 83 см, height 174 см; Yana: Bust-line: 84 см, Waist-line: 60 см, Hips: 90 см, height 175 см.

The images also shows: trousers on pattern №883, mittens on pattern №809, sweatshirt on pattern №862, cap on pattern №836

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• An iron with or without steam;
• Regular presser foot; Hinged cording foot; Walking or Teflon machine foot;
• Wooden iron;
• Ironing desk or console table;
• Hand needle for basting;
• Sewing machine needles № 80 MICROTEX (extra sharp for raincoat fabrics);
• Machine needles №80-90 for the lining;
• Paper scissors; Scissors for textile cutting;
• Eyelet press for installing eyelets and press studs, depending on the diameter.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.