Dress, pattern №1021
A close-fitting dress, cut at the waist, with an asymmetrical button closure and a collar. The bodice is gathered at the waist. The skirt is slightly flared. A waistband is attached to the inside at the waistline.
Difficulty: 4/5
Instructions with photo
Plotter 600 + А4/Letter
Sizes:
-
size 38, height 152-158
-
size 38, height 158-164
-
size 38, height 164-170
-
size 40, height 152-158
-
size 40, height 158-164
-
size 40, height 164-170
-
size 40, height 170-176
-
size 40, height 176-182
-
size 42, height 152-158
-
size 42, height 158-164
-
size 42, height 164-170
-
size 42, height 170-176
-
size 42, height 176-182
-
size 44, height 152-158
-
size 44, height 158-164
-
size 44, height 164-170
-
size 44, height 170-176
-
size 44, height 176-182
-
size 46, height 152-158
-
size 46, height 158-164
-
size 46, height 164-170
-
size 46, height 170-176
-
size 46, height 176-182
-
size 48, height 152-158
-
size 48, height 158-164
-
size 48, height 164-170
-
size 48, height 170-176
-
size 48, height 176-182
-
size 50, height 152-158
-
size 50, height 158-164
-
size 50, height 164-170
-
size 50, height 170-176
-
size 50, height 176-182
-
size 52, height 152-158
-
size 52, height 158-164
-
size 52, height 164-170
-
size 52, height 170-176
-
size 52, height 176-182
-
size 54, height 152-158
-
size 54, height 158-164
-
size 54, height 164-170
-
size 54, height 170-176
-
size 54, height 176-182
-
size 56, height 152-158
-
size 56, height 158-164
-
size 56, height 164-170
-
size 56, height 170-176
-
size 56, height 176-182
-
-
Size:
- 38
- 40
- 42
- 44
- 46
- 48
- 50
- 52
- 54
- 56
Height:
- 152-158
- 158-164
- 164-170
- 170-176
- 176-182
$10
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
Dress pattern. Regular fit, slim-waist dress with flared skirt, with the bodice and skirt attached to each other at waistline, unlined, with ankle length. The shoulder is dropped by 8.0 cm. The bodice front and back are loose with a gathered lower edge. The back features an attached yoke and pleats, placed closer to the armholes. The front and back pieces of the skirt are flared and have little volume. The back skirt piece is designed with waist darts. The shirt-type sleeve is set into the armhole. The lower edge of the sleeve has two pinch pleats and it is finished with an attached cuff. The sleeve slit is finished with a facing. The cuff closure has two buttons and two sewn buttonholes. The front closure is asymmetrical, with two attached plackets, fastened with 12 buttons and 12 buttonholes. The closure is supported with an inner belt with a buttonhole fastening on one button. The rolled collar with a cut-on collar stand is sewn into the upper edge of the plackets of the front and of the back.
Model is wearing a size 42. Model parameters: Bust-line: 84,5 cm, Waist-line: 64 cm, Hips: 91 cm, Height: 174 cm. -
Bust-line – 16,8 сm + model’s widening;
Waist-line – 4,1 cm;
Shoulders – 18,3 cm;
Size 38 40 42 44 46 48 50 52 54 56 Hips-line, cm 13,1-11,7 13,3-10,4 13,5-10,6 13,7-10,8 13,9-11,0 14,1-11,2 14,3-11,4 14,5-11,6 15,2-12,3 16,0-13,1
-
Size 38 40 42 44 46 48 50 52 54 56 Finished back length along the center back 141,7-149,9
141,8-158,2 141,8-158,2 141,9-158,3 141,9-158,3 142,0-158,4 142,0-158,4 142,4-158,8 142,7-159,1 143,0-159,4 Finished sleeve length (including cuff)51,3-55,0 51,5-59,1 51,7-59,3 51,9-59,5 52,1-59,7 52,3-59,0 52,5-60,1 52,8-60,3 53,0-60,5 53,2-60,7 -
Main fabric. For this garment we recommend using lightweight and mid-weight fabrics, which are easy-draping and shaping soft pleats, dressing, shirting fabrics, lightweight suiting fabrics with no stretch or with little stretch. Its composition may consist of natural fibre (wool, cotton or silk), artificial fibre (viscose, modal), synthetic or blended fibre.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 34-39 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.
-
Amount of Fabrics (in metres):
Size 38 40 42 44 46 48 50 52 54 56 Main fabric, wide 140 cm 2,60-2,75 2,70-2,95 2,75-3,00 2,80-3,10 2,85-3,15 2,90-3,25 3,00-3,35 3,10-3.45 3,20-3,55 3,30-3,60 Interfacing (density 34-39 g/m2; width 150 cm) 1,55 1,65 1,70 Bias fusible tape with reinforcement stitches 3,20-3,35 3,20-3,55 3,25-3,55 3,25-3,55 3,25-3,60 3,30-3,60 3,30-3,65 3,30-3,65 3,35-3,65 3,35-3,70 Fusible on grain tape
0,35
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Garment accessories:
1. Self-cover buttons 14 mm in diameter - 16 pcs.
2. Button 14-16 mm in diameter (for the belt) - 1 pcs.
-
Tools and equipment:
1. Multipurpose sewing machine;
2. 3 thread overlock machine;
3. An iron with or without steam;
4. Regular presser foot;
5. Wooden iron;
6. Ironing desk or console table;
7. Hand needle for basting;
8. Machine needles №70-80;
9. Paper scissors;
10. Scissors for textile cutting;
11. Hand press machine and the button cover die, depending on the diameter. -
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!
A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter.
A test square for checking the plotter scale is located on the pattern sheet.
