Skirt, pattern №1018

Sizes:

size 38, height 152-158
size 38, height 158-164
size 38, height 164-170
size 40, height 152-158
size 40, height 158-164
size 40, height 164-170
size 40, height 170-176
size 40, height 176-182
size 42, height 152-158
size 42, height 158-164
size 42, height 164-170
size 42, height 170-176
size 42, height 176-182
size 44, height 152-158
size 44, height 158-164
size 44, height 164-170
size 44, height 170-176
size 44, height 176-182
size 46, height 152-158
size 46, height 158-164
size 46, height 164-170
size 46, height 170-176
size 46, height 176-182
size 48, height 152-158
size 48, height 158-164
size 48, height 164-170
size 48, height 170-176
size 48, height 176-182
size 50, height 152-158
size 50, height 158-164
size 50, height 164-170
size 50, height 170-176
size 50, height 176-182
size 52, height 152-158
size 52, height 158-164
size 52, height 164-170
size 52, height 170-176
size 52, height 176-182
size 54, height 152-158
size 54, height 158-164
size 54, height 164-170
size 54, height 170-176
size 54, height 176-182
size 56, height 152-158
size 56, height 158-164
size 56, height 164-170
size 56, height 170-176
size 56, height 176-182
size 58, height 152-158
size 58, height 158-164
size 58, height 164-170
size 58, height 170-176
size 58, height 176-182
size 60, height 158-164
size 60, height 164-170
size 60, height 170-176
size 60, height 176-182
size 62, height 158-164
size 62, height 164-170
size 62, height 170-176
size 62, height 176-182
-

Size:

Height:

152-158
158-164
164-170
170-176
176-182

After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".

Info

Comments

Questions

Skirt pattern. Option 1. Without pockets. A straight skirt of low volume, lined, falls below mid-calf. The back part has two pairs of darts and a slit in the centre seam. The waistline is 4 cm lower. The waistband is attached, cut, and completed with four belt loops. A zip fastening is placed in the centre seam of the back. The zip goes up to edge of the waistband.
Option 2. With pockets. The front part has patch pockets with flaps, which partially transition to the back part. The pockets are secured with straps. The flap strap is sewn into the waist seam and secures two D-rings. The pocket strap is attached to the pocket and has an increased length.

Patchwork elements: belt loops, straps, pockets and flaps can be used in any combination to create your own design of the skirt.

Eases added to a pattern, cm:

Waist-line – 4,0 cm;

Hips-line – 3,0 cm (in sizes 38-50);

4,0 cm (in sizes 52-62).

Garment Length Measurements, cm:

Size	38	40	42	44	46	48	50	52	54	56	58	60	62
Finished skirt length along the center back part seam (including waistband)	79,1- 85,2	79,3- 91,3	79,5- 91,5	79,7- 91,7	79,9- 91,9	80,1- 92,1	80,3- 92,3	80,5- 92,5	80,7- 92,7	80,9- 92,9	81,1- 93,1	81,3- 93,3	81,5- 93,5

Fabric suggestion:

Main fabric. We recommend using dress or suiting, lightweight or medium density fabrics of natural, synthetic or mixed fibres. For example, this can be a suiting cotton of different density, denim, linen, wool or other fabrics.
Lining material. To line the garment you can use fabrics, the plasticity and density characteristics of which suit the main fabric, the lining can be of natural, synthetic or mixed fibres.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 39 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.

Amount of Fabrics (in metres):

Option 1. Without pockets

Size	38	40	42	44	46	48	50	52	54	56	58	60	62
Main fabric, wide 140 cm	0,90- 0,95	1,00- 1,10	1,00- 1,10	1,00- 1,10	1,00- 1,15	1,05- 1,15	1,10- 1,20	1,10- 1,20	1,10- 1,20	1,10- 1,25	1,35- 1,50	1,80- 1,95	1,80- 2,00
Lining fabric, wide 140 cm	0,85- 0,90	0,85-1,00									0,90- 1,00	1,50- 1,65	1,65- 1,85
Interfacing (density 39 g/m2; width 150 cm)	0,35
Fusible reinforced bias tape	0,80	0,90	0,90	1,00	1,00	1,10	1,10	1,10	1,20	1,20	1,30	1,30	1,40
Fusible on grain tape	1,0							1,10			1,20

Option 2. With pockets

Size	38	40	42	44	46	48	50	52	54	56	58	60	62
Main fabric, wide 140 cm	1,05	1,05- 1,15	1,10- 1,20	1,15- 1,25	1,20- 1,30	1,20- 1,30	1,25- 1,35	1,30- 1,40	1,30- 1,45	1,35- 1,55	1,50- 1,75	1,80- 1,95	1,80- 2,00
Lining fabric, wide 140 cm	0,85- 0,90	0,85-1,00									0,90- 1,00	1,50- 1,65	1,65- 1,85
Interfacing (density 39 g/m2; width 150 cm)	0,35								0,40	0,45
Fusible reinforced bias tape	0,80	0,90	0,90	1,00	1,00	1,10	1,10	1,10	1,20	1,20	1,30	1,30	1,40
Fusible on grain tape	2,10							2,20			2,30

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Garment accessories:
1. Invisible zipper tape 20 cm - 1 pcs.
2. Half rings with the diameter of 15 mm – 4 pcs. (OPTION 2)

Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - "Intermediate”.

The photos shows a skirt sewed at the GRASSER for pattern №1018.

Model is wearing a size 42. Model parameters: Bust-line: 84,5 cm, Waist-line: 64 cm, Hips: 91 cm, Height: 174 cm.

The photo also shows: jacket on pattern №1017, shirt on pattern №90 with changes, sundress on pattern №1019, vest on pattern №1028, bandeau top on pattern №1026.

For sewing you will need the following equipment:

1. Multipurpose sewing machine;
2. 3 thread overlock machine;
3. An iron with or without steam;
4. Regular presser foot;
5. Hinged cording foot;
6. Invisible zipper foot;
7. Wooden iron;
8. Ironing desk or console table;
9. Hand needle for basting;
10. Machine needles №80 for the main fabric;
11. Machine needles №70 for the lining;
12. Paper scissors;
13. Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter.

A test square for checking the plotter scale is located on the pattern sheet.

All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.