Skirt, pattern №1103

Sizes:

size 38, height 152-158
size 38, height 158-164
size 38, height 164-170
size 40, height 152-158
size 40, height 158-164
size 40, height 164-170
size 40, height 170-176
size 40, height 176-182
size 42, height 152-158
size 42, height 158-164
size 42, height 164-170
size 42, height 170-176
size 42, height 176-182
size 44, height 152-158
size 44, height 158-164
size 44, height 164-170
size 44, height 170-176
size 44, height 176-182
size 46, height 152-158
size 46, height 158-164
size 46, height 164-170
size 46, height 170-176
size 46, height 176-182
size 48, height 152-158
size 48, height 158-164
size 48, height 164-170
size 48, height 170-176
size 48, height 176-182
size 50, height 152-158
size 50, height 158-164
size 50, height 164-170
size 50, height 170-176
size 50, height 176-182
size 52, height 152-158
size 52, height 158-164
size 52, height 164-170
size 52, height 170-176
size 52, height 176-182
-

Size:

Height:

152-158
158-164
164-170
170-176
176-182

After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".

Info

Comments

Questions

Skirt pattern. Regular fit. A-line skirt, unlined with a length up to the mid-thigh. The front panel features two seams and slits. The back panel is designed with two darts and a centre seam. The skirt fastens with an invisible zipper, sewn inside the centre seam of the back, and a hook and eye. The upper edges of the skirt are finished with facings. The garment is completed with belt loops. The belt loops are placed below the waist edge on the front seams and darts. The waist is lowered by 2.0 cm.

Eases added to a pattern, cm:

Waist-line: 6,0 cm. Hips-line: 8,0 cm.

Garment Length Measurements, cm:

Size	38	40	42	44	46	48	50	52
Finished skirt length along the center back part seam	40,0-41,0	40,0-44,0	40,0-44,0	40,0-44,0	40,0-44,0	40,0-44,0	40,0-44,0	40,0-44,0

Fabric suggestion:

Main fabric. For this garment we recommend using midweight dressing and suiting fabrics with no stretch or with little stretch, made out of natural, synthetic and blended fibre. For example, it may be suiting cotton fabrics, linen, wool, denim, faux leather or faux suede and other fabrics.

Interfacing materials. For better quality of sewing, we recommend to use the in-terfacing material. For example, you may use 33-39 g/m2 den-sity 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.

Amount of Fabrics (in metres):

Size	38	40	42	44	46	48	50	52
Main fabric, wide 140 cm	0,60-0,65	0,60-0,65	0,65-	0,65-0,70	0,70-0,75	0,75-0,80	0,80-0,85	0,85-0,90
Interfacing (density 33-39 g/m2; width 150 cm)	0,1	0,1	0,1	0,1	0,1	0,1	0,1	0,1
Bias fusible tape with reinforcement stitches	0,75	0,75	0,8	0,85	0,9	0,9	0,95	0,95

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Accessories:

1. Invisible zipper, plastic, #3 20 cm long - 1 piece.
2. Hook and eye set - 1 piece.

Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - «Intermediate».

The photos shows a skirt sewed at the GRASSER for pattern №1103.

Model is wearing a size 42. Model parameters: Bust-line: 81 cm, Waist-line: 61 cm, Hips: 92 cm, Height: 174 cm.

The photo also shows: turtleneck sweater on pattern №893, blouse on pattern №859, jacket on pattern №1102, coat on pattern №1159, longsleeve on pattern №110, shirt on pattern №859, longsleeve on pattern №1173, jacket on pattern №1154.

For sewing you will need the following equipment:

1. Multipurpose sewing machine;
2. 3 thread overlock machine;
3. An iron with or without steam;
4. Regular presser foot;
5. Hinged cording foot or Invisible zipper foot;
6. Wooden iron;
7. Ironing desk or console table;
8. Hand needle for basting;
9. Machine needles №75-80;
10. Paper scissors;
11. Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter.

A test square for checking the plotter scale is located on the pattern sheet.

All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.