Dog sweater, pattern №988
Sizes:
-
size L, length 1
-
size L, length 2
-
size L, length 3
-
size M, length 1
-
size M, length 2
-
size M, length 3
-
size S, length 1
-
size S, length 2
-
size S, length 3
-
size XL, length 1
-
size XL, length 2
-
size XL, length 3
-
size XS, length 1
-
size XS, length 2
-
size XS, length 3
-
-
Size:
- L
- M
- S
- XL
- XS
Height:
- length 1
- length 2
- length 3
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
Dog sweater pattern. Regular fit dog sweater for small and large breeds. No side seam. The holes for the front legs are finished with the cuffs. The neckline is finished with a standing collar. The lower edges of the garment are finished with a waistband. The closure is designed in the centre of the back with two possible options: zipper closure or snap fasteners closure.
Size chart: XS, S, M, L, XL for body length n. 1, 2, 3.
Eases added to a pattern, cm:
Bust-line - 5,0.
Garment Length Measurements, cm
|
Size |
XS |
S |
M |
L |
XL |
||||||||||
|
Length |
1 |
2 |
3 |
1 |
2 |
3 |
1 |
2 |
3 |
1 |
2 |
3 |
1 |
2 |
3 |
|
Finished back length along the center back |
24,4 |
26,5 |
28,5 |
33,3 |
36,3 |
39,3 |
41,7 |
45,7 |
49,7 |
50,5 |
55,5 |
60,5 |
58,8 |
64,8 |
70,8 |
Fabric suggestion:
Main fabric. For this garment we recommend mid-weight and heavy-weight knit fabrics with low stretch factor. For example, 2-thread or 3-thread brushed sweatshirting fabric or 2-thread or 3-thread terry.
Additional material. For cuffs, collar and waistband we recommend knit fabrics with higher stretch factor, for example ribbing fabric.
For the placket and the front facing use mid-weight knit fabric with low stretch factor, for example ponte knit or coated nylon-spandex.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 18 g/m2 density 150 cm, width woven interfacing.The density of the interfacing material depends on the main fabric density.
Amount of Fabrics (in metres):
|
Size |
XS |
S |
M |
L |
XL |
|
Main fabric, wide 140 or 180 cm |
0,40- 0,45 |
0,50- 0,55 |
0,60- 0,65 |
0,70- 0,80 |
0,80- 0,90 |
|
Additional fabric №1, wide 140 cm - for placket and facing (knit fabric or rain wear fabrics) |
0,10 |
0,10 |
0,15 |
0,15 |
0,15- 0,20 |
|
Additional fabric №2, wide 100 cm (kashkorse or ribana) |
0,15 |
0,25 |
0,25 |
0,35 |
0,45 |
|
Interfacing (density 18 g/m2; width 150 cm) |
0,20 |
0,20 |
0,20 |
0,20 |
0,25 |
|
Zipper tape |
0,30- 0,35 |
0,40- 0,45 |
0,50- 0,65 |
0,60- 0,70 |
0,70- 0,80 |
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
1. Central zipper (metal or plastic), open-end, №3) – 1 pcs.
or
2. 12.0-15.0 cm diameter snap buttons:
XS = 4-5 pcs., S = 5-6 pcs., M = 6-7 pcs., L = 7-8 pcs., XL = 8-9 pcs.
Pattern is given with seam allowances.
Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.
Degree of difficulty - "Beginner”.
The photos shows a dog sweater sewed at the GRASSER for pattern №988.
For sewing you will need the following equipment:
2. 4 thread overlock machine;
3. An iron with or without steam;
4. Regular presser foot;
5. Hinged cording foot;
6. Wooden iron;
7. Ironing desk or console table;
8. Hand needle for basting;
9. Machine needles Stretch №70-80;
10. Paper scissors;
11. Scissors for textile cutting;
12. Snaps pressing machine to install accessories snap buttons, depending on the diameter.
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!
A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter.
A test square for checking the plotter scale is located on the pattern sheet.
All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.
