Raincoat, pattern №1097

Sizes:

size 38-42, height 152-164
size 38-42, height 164-170
size 38-42, height 170-182
size 44-48, height 152-164
size 44-48, height 164-170
size 44-48, height 170-182
size 50-54, height 152-164
size 50-54, height 164-170
size 50-54, height 170-182
size 56-62, height 152-164
size 56-62, height 164-170
size 56-62, height 170-182
-

Size:

38-42
44-48
50-54
56-62

Height:

152-164
164-170
170-182

$10

After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".

Info

Comments

Questions

Raincoat pattern. A free volume raincoat with a one-piece sleeve, lined, and with a hood. The length of the garment is up to the knee line. The sleeve length is above the wrist line. The central clasp has 5 snaps. The front is with the welt pockets, with the ends stitched in. The back is with a center seam. The round neck is finished with a hood. The hood is of moderate volume, with a one-piece collar stand and a central part. Hood has 2-snaps closure.

Garment Length Measurements, cm:

Measuring area	Indication on the diagram	38-42	44-48	50-54	56-62
The garment length along the center seam of the back when finished	А	91,7-100,9	92,5-101,7	93,3-102,5	94,1-103,3
The sleeve length from the neckline to the line of the finished view	В	58,5-63,9	58,5-63,9	58,4-63,8	58,4-63,8
The garment width between the end points of the shoulder edge along the back when finished	С	134,5-145,3	136,3-147,1	137,7-148,6	139,4-150,2

Fabric suggestion:

Main fabric. For this model, we recommend using raincoat, jacket fabrics; raincoat fabrics with a membrane; jacket fabrics with or without various types of impregnation, with or without a waterproof coating, of medium density and thickness. According to the composition, these can be materials made of natural, synthetic or mixed fibers.

Lining material. For this model, we recommend using raincoat, jacket fabrics; raincoat fabrics with a membrane; jacket fabrics with or without various types of impregnation, with or without a waterproof coating, of medium density and thickness.

According to the composition, these can be materials made of natural, synthetic or mixed fibers.

Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 39 g/m2 density 150 cm, width woven interfacing.

The density of the interfacing material depends on the main fabric density.

Amount of Fabrics (in metres):

Size	38-42	44-48	50-54	56-62
Main fabric, wide 140 cm	2,55-2,85	2,60-2,85	2,65-3,00	2,70-3,05
Lining fabric, wide 140 cm	2,35-2,90	2,40-3,20	2,40-3,45	2,45-3,70
Interfacing (density 39 g/m2; width 150 cm)	0,25	0,25	0,25	0,25
Fusible on grain tape	0,5	0,5	0,5	0,5

Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Accessories:
1. 12.5-15.0 mm diameter snap buttons – 7 pcs.

Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - «Intermediate».

The photos shows a raincoat sewed at the GRASSER for pattern №1097.

Model Maria is wearing a size 38-42, height 170-182. Model parameters: Bust-line: 85 cm, Waist-line: 63 cm, Hips: 92 cm, Height: 170 cm.

Model Alyona is wearing a size 38-42, height 170-182. Model parameters: Bust-line: 107 cm, Waist-line: 93.5 cm, Hips: 115 cm, Height: 170 cm.

The photo also shows: turtleneck sweater on pattern №913, trousers on pattern №1098, dress on pattern №1069.

For sewing you will need the following equipment:

1. Multipurpose sewing machine;
2. An iron without steam;
3. Regular presser foot;
4. Wooden iron;
5. Ironing desk or console table;
6. Hand needle for basting;
7. Machine needles №80-90 for the main fabric;
8. Machine needles №70-80 for the lining;
9. Paper scissors;
10. Scissors for textile cutting;
11. Snaps pressing machine to install accessories and press studs, depending on the diameter.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter.

A test square for checking the plotter scale is located on the pattern sheet.

All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.