Trousers, pattern №1098
Sizes:
-
size 38, height 152-158
-
size 38, height 158-164
-
size 38, height 164-170
-
size 40, height 152-158
-
size 40, height 158-164
-
size 40, height 164-170
-
size 40, height 170-176
-
size 40, height 176-182
-
size 42, height 152-158
-
size 42, height 158-164
-
size 42, height 164-170
-
size 42, height 170-176
-
size 42, height 176-182
-
size 44, height 152-158
-
size 44, height 158-164
-
size 44, height 164-170
-
size 44, height 170-176
-
size 44, height 176-182
-
size 46, height 152-158
-
size 46, height 158-164
-
size 46, height 164-170
-
size 46, height 170-176
-
size 46, height 176-182
-
size 48, height 152-158
-
size 48, height 158-164
-
size 48, height 164-170
-
size 48, height 170-176
-
size 48, height 176-182
-
size 50, height 152-158
-
size 50, height 158-164
-
size 50, height 164-170
-
size 50, height 170-176
-
size 50, height 176-182
-
size 52, height 152-158
-
size 52, height 158-164
-
size 52, height 164-170
-
size 52, height 170-176
-
size 52, height 176-182
-
size 54, height 152-158
-
size 54, height 158-164
-
size 54, height 164-170
-
size 54, height 170-176
-
size 54, height 176-182
-
size 56, height 152-158
-
size 56, height 158-164
-
size 56, height 164-170
-
size 56, height 170-176
-
size 56, height 176-182
-
-
Size:
- 38
- 40
- 42
- 44
- 46
- 48
- 50
- 52
- 54
- 56
Height:
- 152-158
- 158-164
- 164-170
- 170-176
- 176-182
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
Trousers pattern.Straight, relaxed-fit, full-length women’s trousers. The front pieces feature scoop pockets with side yokes. The back pieces are designed with attached yokes and curved patch pockets. Two-piece waistband is 4 cm wide and has 5 belt loops. The upper edge of the waistband is 3 cm below the waistline. The crotch is lowered by 1.0 cm. The trousers fasten with a zipper, installed into the seam of the front pieces’ connection, a button and a buttonhole on the waistband.
Eases added to a pattern, cm: Waist-line – 7,0 cm. Hips-line – 1,0 cm.
|
Size |
38 |
40 |
42 |
44 |
46 |
48 |
50 |
52 |
54 |
56 |
|
Finished length along the side seam |
92,3-101,0 |
92,5-110,0 |
92,8-110,2 |
93,0-110,4 |
93,2-110,7 |
93,4-110,9 |
93,7-111,1 |
93,9-111,3 |
93,0-111,4 |
94,0-111,4 |
|
Finished garment hem width |
43,3 |
44,9 |
46,5 |
48,1 |
49,7 |
51,3 |
52,9 |
54,5 |
56,1 |
57,7 |
Fabric suggestion:
Main fabric. For this garment we recommend using fabrics with twill weave, denim fabric with medium thickness and density, with no stretch, made out of natural, synthetic or blended fibre.
Lining material. For the pocket lining we recommend using pocket lining fabric (pocketing fabric). You can also use cotton blend satin for the pocket lining.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 39 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.
Amount of Fabrics (in metres):
|
Size |
38 |
40 |
42 |
44 |
46 |
48 |
50 |
52 |
54 |
56 |
|
Main fabric, wide 140 cm |
1,25-1,35 |
1,30-1,45 |
1,30-1,45 |
1,35-1,50 |
1,40-1,55 |
1,45-1,70 |
1,65-1,95 |
1,80-2,10 |
1,85-2,15 |
2,05-2,25 |
|
Lining fabric, wide 140 cm |
0,30 |
|||||||||
|
Interfacing (density 39 g/m2; width 150 cm) |
0,35 |
|||||||||
|
Bias fusible tape with reinforcement stitches |
0,75 |
0,80 |
0,85 |
0,85 |
0,90 |
0,95 |
1,00 |
1,05 |
1,10 |
1,15 |
Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
1. Jean zipper #3, 12-16 cm long - 1 piece.
2. Metal jean button 17 mm - 1 piece.
3. Rivets with diameter 5-7 mm - 4-6 pcs.
Pattern is given with seam allowances.
Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.
Degree of difficulty - «Intermediate».
The photos shows a trousers sewed at the GRASSER for pattern №1098.
Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 81 cm, Waist-line: 61 cm, Hips: 92 cm, Height: 174 cm.
The photo also shows: turtleneck sweater on pattern №913, raincoat on pattern №1097, bomber jacket on pattern №1100, blouse on pattern №1104, jacket on pattern №1107, blouse on pattern №859, tie on pattern №1105, shirt on pattern №1046, jumper on pattern №1101, longsleeve on pattern №110, coat on pattern №1159, jumper on pattern №1172, jacket on pattern №968, sweatshirt on pattern №724.
For sewing you will need the following equipment:
2. 3 thread overlock machine;
3. An iron with or without steam;
4. Regular presser foot;
5. Wooden iron;
6. Ironing desk or console table;
7. Hand needle for basting;
8. Machine needles №90-100 for JEANS;
9. Paper scissors;
10. Scissors for textile cutting.
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!
A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter.
A test square for checking the plotter scale is located on the pattern sheet.
All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.
