Trousers, pattern №971

Trousers pattern. Women’s trousers of moderate volume, narrowed to the bottom, ankle-length, lined.

The belt is fitted, straight, 9.0 cm wide. The belt is divided by parallel finishing lines into 3 parts, an elastic ribbon is inserted inside, 2.5 cm wide. The middle of the belt is at the natural level of the waistline

There is a pocket-briefcase with stitched pleats and a flap on the side surface of the trousers between the hip line and the knee line.

In the side seam there is a pocket with a hidden zipper.

There is a cuff at the bottom of the trousers with the wide of 5.0 cm.

Eases added to a pattern, cm:

Waist-line - 40,6 cm;

Hips-line - 18,6 cm.

Garment Length Measurements, cm

Finished length along the side seam (without waistband and cuff), cm: size 38: 84,8-93,4, size 40: 85,0-102,3, size 42: 85,2-102,5, size 44: 85,4-102,7, size 46: 85,6-102,9, size 48: 85,8-103,1, size 50: 86,0-103,3, size 52: 86,3-103,5, size 54: 86,4-103,6, size 56: 86,5-103,7, size 58: 86,6-103,8, size 60: 91,0-103,9, size 62: 91,1-104,0.

Finished garment hem width, cm: size 38: 42,6, size 40: 43,8, size 42: 45,0, size 44: 46,2, size 46: 47,4, size 48: 48,6, size 50: 49,8, size 52: 51,0, size 54: 52,2, size 56: 53,4, size 58: 54,6, size 60: 55,8, size 62: 57,0.

Fabric suggestion: 

Main fabric. We recommend using soft, medium density and thin raincoat, jacket fabrics for this model; raincoat fabrics with membrane coating; raincoat, jacket fabrics with impregnation.

Finishing fabric. For cuffs and belts we recommend using knitwear with a stretchability coefficient of 0.80 – 0.85, medium density or dense, for example, noodles, kashkorse, ribana.

Lining fabric. As a lining we recommend using knitted fabrics of small and medium density, for example, fleece.

Interfacing materials. For better tailoring we recommend using a side booster with a non-adhesive density of 50 g/m2, a width of 90 cm.

Amount of Fabrics (in metres):

Main fabric, wide 140 cm: size 38: 1,45-1,60, size 40: 1,55-1,75, size 42: 1,60-1,90, size 44: 1,60-1,95, sizes 46-50: 1,65-1,95, size 52: 1,70-2,00, size 54: 1,80-2,15, size 56: 1,85-2,15, size 58: 1,85-2,20, sizes 60-62: 1,95-2,20.

Lining fabric, wide 140 cm: size 38: 1,20-1,35, size 40: 1,35-1,60, size 42: 1,45-1,70, size 44: 1,60-1,85, size 46: 1,60-1,90, sizes 48-52: 1,60-1,95, size 54: 1,65-2,00, size 56: 1,70-2,00, size 58: 1,80-2,10, sizes 60-62: 1,95-2,20.

Lining fabric, wide 180 cm: size 38: 1,00-1,10, sizes 40-46: 1,00-1,20, sizes 48-50: 1,05-1,20, size 52: 1,10-1,30, size 54: 1,15-1,35, size 56: 1,20-1,40, size 58: 1,35-1,55, size 60: 1,50-1,70, size 62: 1,55-1,75.

Finishing fabric (kashkorse, ribana), wide 100 cm: sizes 38-54: 0,40, sizes 56-62: 0,45.

Non-fusible facing straightener of 50 g/m2 and with the width of 90 cm: size 38-62: 0,25.

Elastic band, 2.5 cm wide (including seam allowances): size 38: 2,00, size 40: 2,15, size 42: 2,20, size 44: 2,25, size 46: 2,35, size 48: 2,45, size 50: 2,55, size 52: 2,60, size 54: 2,70, size 56: 2,80, size 58: 2,90, size 60:, 3,00 size 62: 3,05. 

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once. 

Garment accessories:

1.   Plastic invisible zipper tape №3, long 20 сm– 2 pcs.

2.   Elastic band, 2.5 cm wide.

Pattern is given with seam allowances.   

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - "Advanced”.  

The photos shows a trousers sewed at the GRASSER for pattern №971.

Model is wearing a size 44, height 170-176. Model parameters: Bust-line: 92 cm, waist-line: 64 cm, Hips: 97 cm, Height: 179 cm.

For sewing you will need the following equipment: 

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.