Dress in 2 designs, pattern №692

To set up printing of pattern N692 on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Design № 1

It’s a long slim-fit trumpet dress. Front has bodice and long seams that start from the bottom edge of the bodice and go down to the very bottom of the dress. Dress has V-shaped neck hole. Dress has button front closure with 8 buttonholes. There is a knot of ribbons in the area of breast. Back has central seam and long seams that start from shoulder seams and go down to the bottom edge of the dress. Dress has set-in elbow sleeves. Sleeve has one seam. Sleeve has a drop-shaped vent with decorative button. 

Design № 2

It’s a slim-fit knee-long strapped dress. Front has a bodice and long seams that start from the bottom edge of the bodice and go down to bottom hem of the dress. It’s a single-breasted dress with 8 buttonholes and knot of ribbons in the breast area. Back has central seam and long seams that start from the upper edge and go to the bottom hem. Front and back have low shaped necklines. There is a big flounce at the bottom of the dress. 

General increases, laid in the pattern: Bust-line: 8,0 см., Waist: 8,5 см., Hips: 6,0 см., Shoulders: 6,5 см + model’s widening.

Finished back length (design № 1) along the center back seam, см.: 38 size: 132,0-148,0, 40 size: 132,2-148,2, 42 size: 132,4-148,4,  44 size: 132,6-148,6, 46 size: 132,8-148,8, 48 size: 133,0-149,0,  50 size: 133,2-149,2, 52 size: 133,4-149,4, 54 size: 133,6- 149,6, 56 size: 133,8- 149,8

Finished back length (design № 2) along the center back seam, см.: 38 size: 79,0- 87,4, 40 size: 79,2- 87,6, 42 size: 79,4- 87,8,  44 size: 79,6- 88,0, 46 size: 79,8- 88,2, 48 size: 80,0- 88,4,  50 size: 80,2- 88,6, 52 size: 80,4- 88,8, 54 size: 80,6- 89,0, 56 size: 80,8- 89,2

Fabric suggestion: we would recommend to use plastic dress fabrics with good draping property. Fabric either stretch or stretch a little. It could be linen, cotton, wool, viscose or semisynthetic, synthetic or blended fabrics. 

Amount of fabric, 140 cm wide, (design № 1): 38,40 size: 3,05-3,30 м.,  42 size: 3,10-3,35 м., 44 size: 3,25-3,50 м.,  46 size: 3,50-3,75 м., 48,50 size: 3,55-3,80 м., 52 size: 3,60-3,85 м., 54,56 size: 3,65-3,90 м.

Amount of fabric, 140 cm wide, (design № 2): 38 size: 1,55-1,75 м., 40 size: 1,60-1,80 м., 42,44 size: 1,65-1,85 м.,  46 size: 1,70-1,90 м., 48,50,52 size: 1,80-2,00 м., 54,56 size: 1,85-2,05 м.

Pattern is given with seam allowances.

Degree of difficulty - “Middle”

The photo shows a dress sewed at the GRASSER bureau for pattern №692

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

For sewing you will need the following equipment:

• Multipurpose sewing machine;

• 3 thread overlock machine;

• An iron with or without steam;

• Regular presser foot;

• Wooden iron;

• Ironing desk or console table;

• Hand needle for basting;

• Machine needles № 80;

• Paper scissors;

• Scissors for textile cutting.

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a  large-scale plotter. The patterns design №1, size 52 are located on 2 sheets measuring 60*176 см.  The patterns design №1, size 52 are located on sheet measuring 60*205 см.