Jacket, pattern №839

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Jacket pattern.  It’s an oversize straight silhouette lower the hips lined jacket with a hood. Jacket comes with a center front zipper closure that ends at the bust line, from the wrong face zipper is closed with a triangle inset. Garment’s front has a low shaped neckline. There is a princess seam that starts at the shoulder points and ends at the neckline’s seam. Front has two set-in zipper pockets, both pockets have one single kangaroo lining detail. Back has sewn on yoke. Sleeve consists of three details: center, front and back. There is a one-piece cuff at the sleeve’s bottom, cuff’s hem edge is gathered by an elastic ribbon. Medium volume hood comes with a center part. Frontal edge of the hood has a drawstring casing detail by which you can adjust hood’s fitting by a cord with fixators. There are installed grommets in the hood (at around chin level) through which cord’s ends are inserted to the right garment’s face. There is a drawstring casing at the garment’s hem edge with a cord inside, there are fixators at the cord’s ends. Cord’s ends are inserted into the grommets installed in the hem edge of the garment’s front.

Eases added to a pattern, cm:  Bust-line: 31 cm; Hips-line: 23 cm, Shoulders: 22.5cm.

Finished length along the side seam from waist-line to garment hem, см: 38 size: 59,0-67,4, 40 size: 59,1-67,5, 42 size: 59,2-67,6, 44 size: 59,3-67,7, 46 size: 59,4-67,8, 48 size: 59,5-67,9,  50 size: 59,6-68,0, 52 size: 59,7-68,1, 54 size: 59,8-68,2, 56 size: 59,9-68,3.

Fabric suggestion: we recommend to use thin and soft rain wear fabrics, coat fabrics, rain wear fabrics with a water retaining membrane. For membrane fabrics use a lining cloth from synthetic fibers, for coat and rain wear fabrics use a lining cloth from synthetic, blended and natural fibers.

Amount of fabric, wide 140 cm: 

Main fabric (top + lining, jacket of one material): 38 size: 1,85-2,05, 40 size: 1,90-2,10 м, 42 size: 1,95-2,15м, 44 size: 2,00-2,20, 46 size: 2,05-2,25м, 48 size: 2,10-2,30м, 50 size: 2,15-2,35м, 52 size: 2,20-2,40м, 54 size: 2,25-2,45, 56 size: 2,30-2,50м.

Main fabric (only the top): 38 size: 1,00-1,10м, 40 size: 1,10-1,15м, 42 size: 1,10-1,20м, 44-46 size: 1,15-1,25м, 48 size: 1,20-1,25м, 50-52 size: 1,20-1,30м, 54-56 size: 1,20-1,35м.

Finishing fabric 1: 38-46 size: 0,85-0,95м, 48 size: 1,00-1,10м, 50 size: 1,10-1,25м, 52 size: 1,15-1,30м, 54,56 size: 1,20-1,35м.

Finishing fabric 2: 38-42 size: 0,70м, 44-52 size: 0,75м, 54,56 size: 0,75м.

Lining fabric: 38 size: 1,20-1,25м, 40-42 size: 1,20-1,35м, 44 size: 1,35-1,55м, 46-52 size: 1,40-1,55м, 54 size: 1,40-1,60м, 56 size: 1,40-1,80 м.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Pattern is given with seam allowances.

Degree of difficulty - "Advanced”

The photos shows a jacket sewed at the GRASSER  for pattern №839

Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 83см, waist-line: 61см, Hips: 88см, height 173 см

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• An iron with or without steam;
• Regular presser foot;
• Hinged cording foot;
• Wooden iron;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles Microtex №70-80 for the main fabric;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.